Do you have a question about the York H4TS024 and is the answer not in the manual?
Voltage | 208/230V |
---|---|
Refrigerant | R-410A |
Cooling Capacity | 24000 BTU/h |
Stages | Single Stage |
Heating Capacity | 24, 000 BTU/h |
Power Supply | 1 Phase, 60 Hz |
Explains the basic function of thermostats and the importance of a two-stage thermostat for efficiency.
Describes the thermostat requirements for air conditioning systems designed only for cooling.
Covers thermostat types for systems with both cooling and heating capabilities.
Details how to operate systems using a manual change-over thermostat for mode selection.
Explains the automatic operation of computerized electronic thermostats for heating and cooling.
Explains how to select the fan operation mode: Auto, Continuous, or Fan Only.
Step-by-step guide for starting the air conditioning system after installation or power restoration.
Instructions for operating the system after a power interruption and built-in protection features.
Recommends regular preventative maintenance by a qualified YORK dealer for optimal efficiency.
Instructions on how to clean the outdoor unit's coil to maintain proper airflow.
Guidance on lubricating fan motors, including oil type and quantity.
Advice on inspecting, washing reusable, or replacing disposable air filters for efficiency.
Specifies minimum required clearances around the outdoor unit for proper operation.
Items to check before calling a service dealer to avoid unnecessary service calls.
Information on where to obtain replacement parts for the system.
Details on optional warranty packages to reduce potential service call costs.
Tips and recommendations for maximizing system efficiency and saving energy.