700699-YTG-B-0812
Johnson Controls Unitary Products 19
PSC furnaces, such as the TG8S, TGLS, and TG9s, use Coil Only Ratings.
TCGF60S41S4(E)
T*(8,L)X*C20 21.0 FC/MC62D 1665 56.0 38.1 14.75 12.75
T*(8,L)X*C20 21.0 FC/PC60C 1595 54.5 36.0 14.50 12.25
T*(8,L)X*C20 21.0 FC64D 1665 57.0 40.0 15.00 13.00
T*(8,L)X*C20 21.0 HD60 1665 56.5 37.6 14.75 12.75
T*(8,L)X*C20 21.0 UC60C 1595 54.5 36.0 14.50 12.25
T*(8,L)X*C20 21.0 UC60D 1690 55.0 37.2 14.75 12.50
T*9(C,V)*C20 21.0 FC/MC/PC60D 1655 55.0 37.2 14.00 12.00
T*9(C,V)*C20 21.0 FC/MC62D 1655 55.5 37.4 14.00 12.00
T*9(C,V)*C20 21.0 FC/PC60C 1655 55.0 37.2 14.00 12.00
T*9(C,V)*C20 21.0 FC64D 1655 56.5 39.0 14.25 12.25
T*9(C,V)*C20 21.0 HD60 1655 56.0 37.2 14.25 12.25
T*9(C,V)*C20 21.0 UC60C 1655 54.5 36.2 14.00 12.00
T*9(C,V)*D20 24.5 FC/MC/PC60D 1615 54.5 36.0 14.00 12.00
T*9(C,V)*D20 24.5 FC/MC62D 1630 55.5 37.2 14.25 12.25
T*9(C,V)*D20 24.5 FC64D 1630 56.5 39.0 14.50 12.50
T*9(C,V)*D20 24.5 HD60 1615 55.5 36.8 14.25 12.25
T*9(C,V)*D20 24.5 UC60D 1615 54.5 36.0 14.00 12.00
T*9X*C16 21.0 FC/PC60C 1575 54.5 35.8 14.25 12.25
T*9X*C16 21.0 UC60C 1575 54.5 35.8 14.25 12.25
T*9X*C20 21.0 FC/MC/PC60D 1645 55.5 37.4 14.75 12.50
T*9X*C20 21.0 FC/MC62D 1595 55.5 37.2 14.75 12.50
T*9X*C20 21.0 FC/PC60C 1625 55.0 36.4 14.50 12.50
T*9X*C20 21.0 FC64D 1595 56.5 39.0 14.75 12.75
T*9X*C20 21.0 HD60 1625 56.0 37.2 14.75 12.75
T*9X*C20 21.0 UC60C 1625 54.5 36.4 14.50 12.25
T*9X*C20 21.0 UC60D 1645 55.0 36.6 14.50 12.50
T*9X*D20 24.5 FC/MC/PC60D 1730 55.5 37.4 14.75 12.50
T*9X*D20 24.5 FC/MC62D 1645 55.5 37.6 14.50 12.50
T*9X*D20 24.5 FC64D 1645 56.5 39.5 14.75 12.75
T*9X*D20 24.5 HD60 1645 56.0 37.4 14.75 12.50
T*9X*D20 24.5 UC60D 1730 55.5 38.1 14.75 12.75
Y*(8,L)C*C16 21.0 FC/PC60C 1600 54.5 35.8 14.00 12.00
Y*(8,L)C*C20 21.0 FC/MC/PC60D 1600 54.5 36.0 14.25 12.25
Y*(8,L)C*C20 21.0 FC/MC62D 1620 55.5 37.4 14.50 12.50
Y*(8,L)C*C20 21.0 FC/PC60C 1600 54.5 36.0 14.25 12.25
Y*(8,L)C*C20 21.0 FC64D 1630 56.5 39.5 14.75 12.75
Y*(8,L)C*C20 21.0 HD60 1605 56.0 37.0 14.50 12.50
Y*(8,L)C*C20 21.0 UC60C 1605 54.5 36.0 14.25 12.25
Y*9C*C20 21.0 FC/MC/PC60D 1655 55.0 37.2 14.00 12.00
Y*9C*C20 21.0 FC/MC62D 1655 55.5 37.4 14.00 12.00
Y*9C*C20 21.0 FC/PC60C 1655 55.0 37.2 14.00 12.00
Y*9C*C20 21.0 FC64D 1655 56.5 39.0 14.25 12.25
Y*9C*C20 21.0 HD60 1655 56.0 37.2 14.25 12.25
Y*9C*C20 21.0 UC60C 1655 54.5 36.2 14.00 12.00
Y*9C*D20 24.5 FC/MC/PC60D 1615 54.5 36.0 14.00 12.00
Y*9C*D20 24.5 FC/MC62D 1630 55.5 37.2 14.25 12.25
Y*9C*D20 24.5 FC64D 1630 56.5 39.0 14.50 12.50
Y*9C*D20 24.5 HD60 1615 55.5 36.8 14.25 12.25
Y*9C*D20 24.5 UC60D 1615 54.5 36.0 14.00 12.00
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
2. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE
COIL
MODEL
1
COOLING
MODEL WIDTH
RATED
CFM
NET MBH
SEER EER
TOTAL SENS.
14.5 SEER AC WITH HIGH EFFICIENCY MOTOR FURNACES
2
To Next Page
Loading...
