What to do if my York Thermostat air conditioning does not turn on?
If your York thermostat isn't turning on the air conditioning, it might be because the cooling setpoint is set too high. Try lowering the cooling setpoint or lowering the cooling set-point limit.
Why is the display blank on my York Thermostat?
If your York thermostat display is blank, it indicates a lack of proper power. Ensure that the power to the furnace is on and that you have 24vac between R & C.
What to do if both heat and cool come on when calling for cooling with my York Thermostat?
If your York thermostat is calling for cooling, but both the heat and cool are activated, it means the thermostat equipment jumper is configured for “HP” while your HVAC unit is a Gas/Electric. To resolve this, set the equipment jumper for “Gas”.
What to do if my York Thermostat heating does not turn on?
If your York thermostat isn't turning on the heating, it might be because the heating setpoint is set too low. Try raising the heating setpoint or raise the heating set- point limit.
General| Refrigerant | R-410A |
|---|---|
| Series | LX |
| Cooling Capacity | 1.5 to 5 tons |
| Warranty | 10-year limited warranty |
| Sound Level | As low as 72 dBA (depending on model) |
Guides on selecting desired temperatures, using the fan, and viewing sensor data.
Step-by-step guide for removing the old thermostat and preparing for new installation.
Explains terminal designations and their functions for connecting the thermostat.
Identifies backplate terminals and explains the function of thermostat jumpers.
Provides wiring diagrams for conventional, heat pump, and dual fuel systems.
To Next Page
