Need help?Do you have a question about the York SAC and is the answer not in the manual?
General| Brand | York |
|---|---|
| Model | SAC |
| Category | Air Conditioner |
| Language | English |
Specifies the naming convention for the unit models.
Details mechanical characteristics of the SOC outdoor units.
Details mechanical characteristics of the SIC-240 indoor unit.
Presents physical specifications for the outdoor SOC units.
Presents physical specifications for the SIC indoor units.
Outlines the operating conditions under which performance data was measured.
Factors to adjust cooling capacity based on temperatures.
Details fan performance characteristics for the SIC-240 model.
Provides general guidance for installing SOC series outdoor units.
Information on environmentally responsible disposal of packing materials.
Explains various safety warning symbols found on the unit.
Guidelines for safely transporting the outdoor units.
Recommendations for selecting an optimal installation location.
Specifies required clearance for installation and service.
Instructions for connecting indoor unit air ducts to minimize vibration.
Details on how to properly install drainage tubing and siphons.
Information on unit valves and initial refrigerant charge.
Procedure for removing air and moisture from the cooling circuit.
Method for detecting refrigerant leaks in the system.
Nominal refrigerant quantities for different unit models.
How to adjust refrigerant load based on tubing length.
Recommendations for connecting refrigerant lines between units.
Specifies tubing diameters for gas and liquid lines.
Requirements for insulating refrigerant tubing.
Electrical specifications for the indoor units.
Overview of unit operation via ambient thermostat.
Description of the ambient thermostat and its controls.
Operating instructions for T-11 and T-12 thermostat models.
Operating instructions for the T-22 thermostat model.
Procedure for cleaning the outdoor unit's exterior and components.
Instructions for filling the drainage siphon before operation.
Notes on discharging indoor units equipped with ducts.
Importance and method for cleaning air filters.
Guidelines for inspecting and adjusting motor belts.
To Next Page