York EMBASSY Series User Manual

INSTALLATION
MANUAL
SAVE THIS MANUAL
INSTALLATION & OPERATING INSTRUCTIONS
FOR D2SK036 - D2SK300
VERTICAL AIR CONDITIONING UNITS
036-21540-001-A-0503
D2SK036-300
EMBASSY SERIES
CONTENTS
GENERAL INFORMATION . . . . . . . . . . . . . . . . . . 3
PRE-INSTALLATION INSPECTION
OF EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
UNIT MOUNTING . . . . . . . . . . . . . . . . . . . . . . . . . .5
OUTDOOR AIR DUCTWORK . . . . . . . . . . . . . . . .12
EVAPORATOR BLOWER DISCHARGE
CONVERSION . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
BLOWER SPEED ADJUSTMENT . . . . . . . . . . . . 17
LOW AMBIENT DAMPER INSTALLATION. . . . . 18
START-UP AND OPERATION. . . . . . . . . . . . . . . 19
MAINTENANCE / SERVICE . . . . . . . . . . . . . . . .20
See the following page for a complete Table of
Contents.
NOTES, CAUTIONS AND WARNINGS
The installer should pay particular attention to the
words: NOTE, CAUTION, and WARNING. Notes
are
intended to clarify or make the installation easier.
Cautions
are given to prevent equipment damage.
Warnings
are given to alert installer that personal
injury and/or equipment damage may result if installa-
tion procedure is not handled properly.
CAUTION: READ ALL SAFETY GUIDES BEFORE

York EMBASSY Series Specifications

General

Brand	York
Model	EMBASSY Series
Category	Air Conditioner
Language	English

Summary

General Information

Installation Procedures

Unit Mounting

Details on mounting units, including split packages and freestanding options on solid, level surfaces.

Evaporator Condenser Separation

Procedure for separating evaporator and condenser sections, including refrigerant line handling for specific models.

Assembly of Split Units

Steps for positioning and securing evaporator sections onto condensing sections for split units.

Outdoor Air Ductwork

Louver Sizing Guidelines

Recommendations for sizing condenser intake and discharge louvers for optimal performance and airflow.

Evaporator Blower Discharge Conversion

Electrical Wiring

Blower Speed Adjustment

Low Ambient Damper Installation

Start-Up and Operation

Maintenance and Service

Filters

Guidance on inspecting and replacing air filters for optimal unit performance and airflow.

Evaporator and Condenser Coils

Instructions for inspecting and cleaning evaporator and condenser coils to maintain efficiency.

Blowers

Recommendations for inspecting blower wheels, bearings, and ensuring proper shaft mounting.

Drive Belts

Procedures for examining belt wear, tension adjustment, and optimal belt life.

Refrigerant Circuit

Guidance on checking and recording refrigerant pressures and compressor current for monitoring.