To Next PageTo Next Page
Need help?Do you have a question about the York YCSA 150 T and is the answer not in the manual?
General| Brand | York |
|---|---|
| Model | YCSA 150 T |
| Category | Air Conditioner |
| Language | English |
Overview of the high-performance air-water chiller and heat pump units.
Lists the YCSA and YCSA-H models and their cooling/heating capacities.
Details key features and benefits of the units, such as R-410A, small footprint, and quality components.
Describes the step-by-step process of the cooling cycle in the unit.
Explains the reverse operation process for the heating cycle.
Lists essential data required for selecting a YCSA/YCSA-H water chiller.
Provides a practical example for selecting a YCSA-H heat pump based on specific conditions.
Outlines the information needed for selecting a YCSA water chiller with glycol.
Emphasizes that installation and maintenance should only be done by qualified personnel.
Explains the μC3 controller module, its software, and connectivity.
Configuration parameters for compressor operation, including run hours and maintenance.
Details defrost cycle parameters, including start/end pressures and timing.
Covers fan control parameters for condensation, including speed and pressure settings.
Settings for unit type, compressor rotation, pump operation, and communication protocols.
Lists and describes all digital and analogical inputs and outputs of the control system.
Configuration options for various alarm thresholds and reset behaviors.
Parameters for setting cooling and heating temperatures, including bands and compensation.
Details the sequence and parameters involved in the unit's defrost cycle.
Explains the antifreeze system, heaters, and unit blocking on low temperatures.
Describes how alarms are displayed, their causes, and reset procedures.
