York YHJD30S41S4 - Page 12

571209-YTG-C-1012
12 Johnson Controls Unitary Products
PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.
YHJD48S41S4
T*9(C,V)*D20 24.5 FC/MC/PC60D 1615 44.5 33.6 14.00 12.00
T*9(C,V)*D20 24.5 FC/MC62D 1630 45.0 34.0 14.00 12.00
T*9(C,V)*D20 24.5 UC60D 1615 44.0 33.0 14.00 12.00
T*9X*C16 21.0 FC/MC62D 1550 45.0 34.2 14.50 12.00
T*9X*C16 21.0 FC/PC60C 1575 44.5 33.8 14.50 12.00
T*9X*C16 21.0 UC60C 1575 44.5 33.2 14.50 12.00
T*9X*C20 21.0 FC/MC62D 1595 45.0 34.2 14.50 12.00
T*9X*C20 21.0 FC/PC60C 1625 44.5 34.0 14.50 12.00
T*9X*C20 21.0 UC60C 1625 44.5 33.2 14.50 12.00
T*9X*D20 24.5 FC/MC/PC60D 1490 45.5 33.6 14.50 12.00
T*9X*D20 24.5 FC/MC62D 1610 45.0 34.2 14.50 12.00
T*9X*D20 24.5 UC60D 1490 44.5 32.8 14.50 12.00
Y*(8,L)C*C16 21.0 FC/MC62D 1635 45.0 34.2 14.50 12.00
Y*(8,L)C*C16 21.0 FC/PC60C 1600 44.5 33.6 14.00 12.00
Y*(8,L)C*C16 21.0 UC60C 1625 44.0 33.0 14.00 12.00
Y*(8,L)C*C20 21.0 FC/MC62D 1615 45.0 34.2 14.50 12.00
Y*(8,L)C*C20 21.0 FC/PC60C 1620 44.5 33.8 14.00 12.00
Y*(8,L)C*C20 21.0 UC60C 1605 44.5 33.2 14.50 12.00
Y*9C*C16 21.0 FC/MC62D 1590 45.0 34.0 14.00 12.00
Y*9C*C16 21.0 FC/PC60C 1590 44.0 33.6 14.00 12.00
Y*9C*C16 21.0 UC60C 1590 44.0 33.0 14.00 12.00
Y*9C*C20 21.0 FC/MC62D 1655 44.5 33.8 14.00 12.00
Y*9C*C20 21.0 FC/PC60C 1645 44.0 33.6 14.00 12.00
Y*9C*C20 21.0 UC60C 1645 44.0 33.0 13.75 11.50
Y*9C*D20 24.5 FC/MC/PC60D 1615 44.5 33.6 14.00 12.00
Y*9C*D20 24.5 FC/MC62D 1630 45.0 34.0 14.00 12.00
Y*9C*D20 24.5 UC60D 1615 44.0 33.0 14.00 12.00
YHJD60S41S5
T*(8,L)V*C20 21.0 FC/MC62D 1600 57.0 39.5 13.70 11.60
T*(8,L)V*C20 21.0 FC64D 1855 57.0 42.5 13.25 11.40
T*(8,L)X*C20 21.0 FC/MC62D 1665 57.5 40.0 14.00 12.00
T*(8,L)X*C20 21.0 FC64D 1665 56.0 41.0 13.75 11.60
T*9(C,V)*C20 21.0 FC/MC62D 1655 57.0 39.5 13.50 11.60
T*9(C,V)*C20 21.0 FC64D 1630 55.5 40.5 13.25 11.40
T*9(C,V)*D20 24.5 FC/MC62D 1630 57.5 39.5 13.70 11.60
T*9(C,V)*D20 24.5 FC64D 1630 55.5 40.0 13.25 11.40
T*9X*C20 21.0 FC/MC62D 1595 57.5 40.0 14.00 12.00
T*9X*C20 21.0 FC64D 1595 55.5 40.0 13.50 11.40
T*9X*D20 24.5 FC/MC62D 1645 57.5 40.0 14.00 12.00
T*9X*D20 24.5 FC64D 1645 56.0 40.5 13.50 11.40
Y*(8,L)C*C20 21.0 FC/MC62D 1600 57.0 39.5 13.70 11.60
Y*(8,L)C*C20 21.0 FC64D 1855 57.0 42.5 13.25 11.40
Y*9C*C20 21.0 FC/MC62D 1655 57.0 39.5 13.50 11.60
Y*9C*C20 21.0 FC64D 1655 55.5 40.5 13.20 11.30
Y*9C*D20 24.5 FC/MC62D 1630 57.5 39.5 13.70 11.60
Y*9C*D20 24.5 FC64D 1630 55.5 40.0 13.25 11.40
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
2. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE
COIL
MODEL
1
COOLING
MODEL WIDTH
RATED
CFM
Net MBH
SEER EER
TOTAL SENS.
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
2