York YHJF18 - Page 10

561923-YTG-E-0613
10 Johnson Controls Unitary Products
PSC furnaces, such as the TG8S, TGLS ,TG9S, use Coil Only Ratings.
YHJF42S41S2
Y*9C*C16 21.0 FC/MC/PC48C 1395 40.0 29.8 14.50 12.00
Y*9C*C16 21.0 FC/MC62D 1445 40.0 30.8 14.00 11.50
Y*9C*C16 21.0 FC/PC60C 1445 40.0 29.8 14.00 11.75
Y*9C*C20 21.0 FC/MC/PC48C 1430 40.0 29.6 14.00 11.75
Y*9C*C20 21.0 FC/MC62D 1445 40.5 30.8 14.50 12.00
Y*9C*C20 21.0 FC/PC60C 1445 40.0 30.0 14.00 12.00
Y*9C*D20 24.5 FC/MC/PC48D 1450 40.0 29.8 14.50 12.00
Y*9C*D20 24.5 FC/MC/PC60D 1445 40.0 30.0 14.50 12.00
Y*9C*D20 24.5 FC/MC62D 1455 40.5 31.0 14.50 12.00
YHJF48S41S1
T*(8,L)V*C16 21.0 FC/MC62D 1635 48.0 36.0 14.50 12.00
T*(8,L)V*C16 21.0 FC64D 1635 48.0 36.2 14.50 12.00
T*(8,L)V*C20 21.0 FC/MC62D 1615 48.0 36.0 14.50 12.00
T*(8,L)V*C20 21.0 FC64D 1615 48.0 36.2 14.50 12.00
T*(8,L)X*C16 21.0 FC/MC62D 1610 48.0 36.2 14.50 12.00
T*(8,L)X*C16 21.0 FC64D 1610 48.0 36.2 15.00 12.50
T*(8,L)X*C20 21.0 FC/MC62D 1665 48.0 36.2 14.50 12.00
T*(8,L)X*C20 21.0 FC64D 1665 48.0 36.2 15.00 12.50
T*9(C,V)*C16 21.0 FC/MC62D 1590 47.5 36.0 14.35 12.00
T*9(C,V)*C16 21.0 FC64D 1590 48.0 36.2 14.50 12.00
T*9(C,V)*C20 21.0 FC/MC62D 1655 47.5 35.8 14.05 12.00
T*9(C,V)*C20 21.0 FC64D 1655 48.0 36.2 14.25 12.00
T*9(C,V)*D20 24.5 FC/MC62D 1630 47.5 35.8 14.25 12.00
T*9(C,V)*D20 24.5 FC64D 1630 48.0 36.2 14.50 12.00
T*9X*C16 21.0 FC/MC62D 1550 48.0 36.0 14.50 12.00
T*9X*C16 21.0 FC64D 1550 48.0 36.2 15.00 12.50
T*9X*C20 21.0 FC/MC62D 1595 48.0 36.2 14.50 12.00
T*9X*C20 21.0 FC64D 1595 48.0 36.2 15.00 12.50
T*9X*D20 24.5 FC/MC62D 1610 48.0 36.0 14.50 12.00
T*9X*D20 24.5 FC64D 1610 48.0 36.2 14.50 12.00
Y*(8,L)C*C16 21.0 FC/MC62D 1635 48.0 36.0 14.50 12.00
Y*(8,L)C*C16 21.0 FC64D 1635 48.0 36.2 14.50 12.00
Y*(8,L)C*C20 21.0 FC/MC62D 1615 48.0 36.0 14.50 12.00
Y*(8,L)C*C20 21.0 FC64D 1615 48.0 36.2 14.50 12.00
Y*9C*C16 21.0 FC/MC62D 1590 47.5 36.0 14.35 12.00
Y*9C*C16 21.0 FC64D 1590 48.0 36.2 14.50 12.00
Y*9C*C20 21.0 FC/MC62D 1655 47.5 35.8 14.05 12.00
Y*9C*C20 21.0 FC64D 1655 48.0 36.2 14.25 12.00
Y*9C*D20 24.5 FC/MC62D 1630 47.5 35.8 14.25 12.00
Y*9C*D20 24.5 FC64D 1630 48.0 36.2 14.50 12.00
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
2. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE
COIL
1
MODEL
COOLING
MODEL WIDTH
RATED
CFM
NET MBH
SEER EER
TOTAL SENS.
14.5 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
2