Yost Vise 650-C User Manual

Thank you for choosing a Yost Vise. For future reference please record the following:
Model #: 650-C
Purchase Date: _____________
Supplier: _____________
I n s p e c t i o n a n d A c c e p t a n c e
Claims for damage, shortage or errors in shipping must be reported within one (1) day
following delivery to Buyer. Buyer shall have seven (7) days from the date Buyer
receives any products to inspect such products and services for defects and
nonconformance which are not due to damage, shortage or errors in shipping and notify
Seller, in writing, of any defects, nonconformance or rejection of such products. After
such seven (7) day period, Buyer shall be deemed to have irrevocably accepted the
products, if not previously accepted. After such acceptance, Buyer shall have no right to
reject the products for any reason or to revoke acceptance. Buyer hereby agrees that such
seven (7) day period is a reasonable amount of time for such inspection and revocation.
Buyer shall have no right to order any change or modification to any product or services
previously ordered by Buyer or its representatives or cancel any order without Seller's
written consent and payment to Seller of all charges, expenses, commissions and
reasonable profits owed to or incurred by Seller. Specially fabricated or ordered items
may not be canceled or returned, and no refund will be made. The sole and exclusive
remedy for merchandise alleged to be defective in workmanship or material would be the
replacement of the merchandise subject to the manufacturer's inspection and warranty.
Product Specifications:
1. Technical Statistics:
Model Item Jaw Jaw Pipe Throat
Number Number Width Opening Capacity Depth Weight
650-C 10650-C 4” 4-1/2” 1/4” – 2” 3-7/16” 37lb
2. Jaws able to withstand a load of no less than 1600 inch pounds without distortion
of the vise or any components.

Yost Vise 650-C Specifications

General

Model	650-C
Type	Bench Vise
Jaw Width	6 inches
Jaw Opening	6 inches
Material	Cast Iron
Swivel Base	Yes
Pipe Jaws	Yes
Anvil	Yes
Mounting Type	Bench Mount
Finish	Powder Coated
Vise Type	Bench Vise

Summary

Inspection and Acceptance Policy

Reporting Claims and Inspection Period

Buyer must report shipping claims within one day and inspect products for defects within seven days of delivery.

Product Specifications

Technical Statistics

Details key measurements including Jaw Width, Opening, Pipe Capacity, Throat Depth, and Weight for the vise model.

Load Capacity

Specifies that jaws can withstand a minimum load of 1600 inch pounds without distortion.

Important Safety Instructions

Safe Work Area and Setup

Ensures a safe environment by securing workbenches and using proper mounting hardware.

Personal Protective Equipment

Recommends wearing eye, face, ear protection, dust masks, and restrictive hair covering during operation.

Safe Vise Operation Practices

Covers using correct vise size, securing handles, inspecting for damage, and avoiding over-tightening.

Prohibited Actions and Warnings

Lists actions to avoid, such as using hammers on handles, welding bases, or placing combustible materials.

Mount Vise To A Secure Workbench

Workbench Preparation and Securing

Instructions on placing, marking, drilling, and securing the vise to the workbench with appropriate hardware.

Vise Operation Guide

Initial Setup and Jaw Opening

Ensures the vise is mounted securely and the swivel base lockdowns are tight before opening jaws.

Clamping and Releasing Workpieces

Steps for placing items between jaws, tightening securely, and releasing after work is completed.

Swivel Base Operation

Adjusting Vise Position

Procedure for loosening lockdowns, rotating the vise for better access, and re-securing it.

Parts List and Contact Information

Vise Components Identification

Lists all parts for the 650-C Mechanics Vise with their corresponding part numbers and quantities.

Customer Support and Terms

Provides contact details for Yost Vises and information on accessing full terms and conditions of sale.