13
◆
Pedal Installation (Requires 15mm Wrench)
Step 1: Ensure correct pedal orientation; the right pedal is marked with an "R," and the left pedal may be identified by an "L" or lack of marking.
You can find these indicators on the pedal's plastic cover and the end of the pedal threads.
Step 2: Lightly grease the pedal spindle. Start threading each pedal by hand, making sure it threads straight and smoothly. If there's resistance,
double-check the side alignment. Once hand-tightened, use a 15mm wrench to fully secure the pedals.
To Next Page
Loading...