Avoid completely draining your battery. Switch off the power when the battery charge is low to preserve its lifespan.
After each use, fully recharge the battery regardless of the amount of power consumed. This practice extends battery life. For long-term storage, keep
the battery fully charged and recharge it monthly.
The Leopard is designed for light rain conditions. However, avoid riding in heavy downpours or flooded areas, as water exposure to the crank and motor
may lead to malfunctions.
Store the battery away from open flames or high heat sources. Avoid direct sunlight exposure and refrain from recharging immediately after use in high-
temperature conditions.
34
Battery Maintenance (48V 20Ah Battery with Samsung Cells)
◆
Clean the chain after every ride, especially in damp conditions. Wipe the chain and its components with a dry cloth. Use a brush to remove sand and dirt,
and warm soapy water if necessary. Avoid strong acidic or alkaline cleaners.
After cleaning, apply lubricant to prevent rust. Ensure the chain is dry before lubrication, focusing on the bearings.
To reduce chain wear, maintain a straight chain line during gear shifts. Avoid combinations like the smallest gear with the smallest flywheel, or the largest
gear with the largest flywheel.
Chain Maintenance
◆
Use a clean, oil-free, lint-free cloth with plain or soapy water for cleaning. To prevent water ingress into the front fork, invert the bike during cleaning. Dry
thoroughly with a lint-free towel afterward, paying special attention to the inner tube and dust seal to minimize wear and prevent thinning of the inner tube,
which can be detrimental if the aluminum is exposed to air.
We advise using a front fork dust cover to protect the inner tube. This helps to keep dust out and prevents damage from hard objects.
Front Fork Maintenance
◆
To Next Page
Loading...