To Next PageTo Next Page
Need help?Do you have a question about the YouKits EK-1A and is the answer not in the manual?
General| Frequency Range | 40m Band (7.0 - 7.3 MHz) |
|---|---|
| Mode | CW |
| Tuning Method | Manual |
| Weight | 0.5 kg |
| Voltage | 12V DC |
| Supply Voltage | 12V DC |
| Type | Transceiver |
| Current Consumption | 1.5A |
Provides model, year, band details, and key technical specifications like size, weight, and frequencies.
Details external DC and internal battery power supply requirements and precautions.
Explains headphone connection and antenna connection methods for optimal performance.
Describes how to connect and use different types of keys, including automatic detection.
Explains how to power on/off the device and adjust receiver gain using the rotary switch.
Details changing frequency in VFO and memory locations in Memory mode using the tuning knob.
Describes switching between VFO, Memory, and Save modes via the V/M/SAV button.
Explains entering/exiting RIT function and adjusting frequency or keyer speed.
Details the use of the ATT button for attenuating the front-end signal.
Explains how to change the tuning step between 10Hz, 100Hz, 1KHz, and 100KHz.
Details the frequencies for transmitting and how the display indicates TX status.
Explains how the display shows the current battery charge status.
