WARNING
Improper maintenance and storage of the drop spreader may void your warranty.
MAINTENANCE
• After each use clean material out of hopper.
• Rinse/dry inside and outside of the spreader after each use.
• Periodically check all fasteners for tightness.
• Annually clean and lightly lubricate moving parts or as needed.
• Use a glossy enamel spray paint to touch up scratched or worn painted metal surfaces.
• Never exceed load capacity rating of 50lbs it will damage the spreader.
IMPORTANT:
If a part needs replacement, only use parts that meet the manufacturer’s specifications. Replacement
parts that do not meet specifications may result in a safety hazard or poor operations.
STORAGE
• Never allow material to remain in the hopper for extended periods of time. Return unused product to its
original container.
• Before storing make sure the spreader is clean and dry for years of trouble-free service.
• Store indoors or protected area during severe weather and winter months.
Load Capacity ......................................................................................................... 50lb (22.7kg)
Spreader Type ............................................................................................................. Broadcast
Hopper Material ..................................................................................................... Polypropylene
Hopper Dimensions (Diameter x Height).............................................. 14.4”x 12.6” (36.5x32cm)
Overall Dimensions ........................................................... 36.4”x21.3”x40.9” (92.5x54x103.8cm)
Pneumatic Tire ......................................................................................................... 12” (30.5cm)
To Next Page
Loading...