Response time : ≤0.5s ( when digital filter parameter dL=0)
Control mode:
On-off control mode (deadband adjustable)
Standard PID with auto tuning
AI PID with auto tuning, adopting artificial intelligence algorithm.
Output mode (modularized)
Relay output (NO+NC): 250VAC/2A or 30VDC/1A
TRIAC no contact discrete output (NO or NC): 100～240VAC/0.2A (continuous), 2A (20mS instantaneous,
repeat period≥5s)
SSR Voltage output: 12VDC/30mA (used to drive SSR).
Thyristor zero crossing trigger output: can trigger TRIAC of 5～500A, a pair of inverse paralleled SCRs or
SCR power module.
Linear current output: 0～20mA, 4～20mA (Output voltage ≥11V, maximum load resistor 500ohm, output
precision 0.2%FS)
Electromagnetic compatibility (EMC): ±4KV/5KHz according to IEC61000-4-4; 4KV according to
IEC61000-4-5.
Isolation withstanding voltage : between power, relay contact or signal terminals ≥2300VDC; between
isolated electroweak terminals ≥600VDC
Power supply : 100～240VAC, -15%, +10% / 50-60Hz; 120～240VDC; or 24VDC/AC, -15%, +10%.
To Next Page
Loading...