1.4 TECHNICAL SPECIFICATION
Input type: (Either of below specifications can be used selectively in the same instrument)
Thermocouple: K, S, E, J, T , N
Resistance temperature detector: Cu50, Pt100
Linear voltage: 0～5V, 1～5 V , 0 ～1V, 0～100mV, 0～20mV, etc.
Linear current (external precise shunt resist needed): 0～10mA,0～20mA, 4～20mA, etc.
Extended input (install I4 module in MIO) : 0～20mA, 4～20mA or two line transmitter.
Optional: apart from the above-mentioned Input type, an additional type can be provided upon request.
(Graduation index is needed)
Instrument Input range
K(-50～1300℃), S(-50～1700℃), T(-100~+350℃), E(0～800℃), J(0～1000℃), N(0～1300℃)
Cu50(-50～+150℃), Pt100(-200～+600℃)
Linear Input: -1999～+9999 defined by user
Measurement accuracy : 0.3%FS
Resolution : 0.1℃ for K, E, T, N, J, Cu50, Pt100; 1℃ for S
To Next Page
Loading...