13
measurement results up to 1,000,000 times.
Notes: When the sampling number exceeds 1 million times, the average value,
standard deviation and sampling number will be suspended and remain the same,
and the measurement for REL/MAX/MIN/P-P is still progressing and is not
subject to the sampling number.
2) In the measurement state, press “Key 2” and hold it for 2 seconds until
“――――――” is displayed in order to realize the clear (“Cancel”) function.
The function refers to taking the current measurement value as the “reference
value” for the new relative value, clearing all mathematic measurement results
and restarting all mathematic measurement.
3) In the menu state, press “Key 2” briefly to realize the function of “shift key”;
press “Key 2” and hold it for 2 seconds to realize the function of menu
backwards.
4) In the menu state, briefly pressing Key 2 and Key 1 at the same time can
also realize the function of menu backwards.
5) In the calibration state, press “Key 2” to cancel (ESCAPE) the calibration
function, and then press “Key 4” to exit the calibration state.
6) In the measurement state, press “Key 2 + Key 4” and hold them for 2
seconds to calibrate internal compensation errors of thermocouple reference
ends.
To Next Page
Loading...