24
(14) In.LoW: The input signals (including signals of the reference ends) are lower
than the measurement range.
(15) In.HIgh: The input signals (including signals of the reference ends) are
higher than the measurement range.
(16) In.Err: Abnormal input (open, broken and other situation for sensors).
(17) WrI.Err: There are errors for saving parameters, which may results from
low battery voltage, so try to resolve this problem by replacing the batteries with
new ones.
Accessories
(1) One K-type class-Ⅰthermocouple wire with plug. (-40℃~250℃)
Optional Accessories:
Customized probes with different structure forms can be provided.
(1) Precise platinum resistance probe: class-A, four-wire plug, with handle.
(2) Precise thermocouple probe: K-type, class-Ⅰ, with handle.
(3) Four-wire resistance measuring wire (Can connect RTD input or wiring
with thermocouple for the external reference end compensation mode
(EXT))
(4) mV measuring wire with two-wire plug.
To Next Page
Loading...