Instrument Input range
K(-100～1300℃), S(0～1700℃), R(0～1700℃), T(-200～+390℃), E(0～1000℃), J(0～1200℃),
B(600～1800℃), N(0～1300℃), WRe3-WRe25(0～2300℃), WRe5-WRe26(0～2300℃)
Cu50(-50～+150℃), Pt100(-200～+800℃)
Linear Input: -9990～30000 defined by user.
Measurement accuracy : 0.3%FS ± 0.1℃
Resolution : 0.1℃ (automatically change to 1℃ when the temperature is high than 999.9℃) or 1℃
selectable
Temperature drift : ≤0.01%FS /℃ (typical value is 50ppm/℃)
Response time : ≤0.5s ( when digital filter parameter dL=0)
Control mode:
On-off control mode (deadband adjustable)
AI MPT with auto tuning, adopting fuzzy logic PID algorithm.
Output mode (modularized)
Relay output (NO+NC): 250VAC/2A or 30VDC/1A
TRIAC no contact discrete output (NO or NC): 100 ～ 240VAC/0.2A (continuous), 2A (20mS
instantaneous, repeat period≥5s)
SSR Voltage output: 12VDC/30mA (used to drive SSR).
Thyristor zero crossing trigger output: can trigger TRIAC of 5～500A, a pair of inverse paralleled
SCRs or SCR power module.
Linear current output: 0～20mA, 4～20mA (The output voltage of X module ≥10.5V; and that of X3
module ≥10.5V.)
Electromagnetic compatibility (EMC) : ±4KV/5KHz according to IEC61000-4-4; 4KV according to
IEC61000-4-5.
Isolation withstanding voltage : between power, relay contact or signal terminal ≥ 2300VDC;
between isolated electroweak terminals ≥600VDC
Power supply : 100～240VAC, -15%, +10% / 50-60Hz; 120～240VDC; or 24VDC/AC, -15%, +10%.
Power consumption: ≤5W
Operating Ambient : temperature -20～60℃; humidity ≤90%RH
Stock ambient: temperature -30~+70C
Front panel dimension: 96×96mm, 160×80mm, 80×160mm, 48×96mm, 96×48mm, 48×48mm,
72×72mm
Panel cutout dimension: 92×92mm, 152×76mm, 76×152mm, 45×92mm, 92×45mm, 45×45mm,
68×68mm
To Next Page
Loading...
