Need help?Do you have a question about the Yudian AI Series and is the answer not in the manual?
General| Control Mode | On/Off |
|---|---|
| Input Type | Thermocouple (K, S, T, E, J, B, N), RTD (Pt100, Cu50), Linear Current (4-20mA), Linear Voltage (0-5V, 1-5V) |
| Output Type | Relay, SSR, Linear Current (4-20mA) |
| Power Supply | AC 90-260V, 50/60Hz or DC 24V |
| Communication | RS485 Modbus RTU |
| Accuracy | ±0.2%FS |
| Operating Temperature | 0-50°C |
| Storage Temperature | -20-60°C |
| Humidity | 85% RH (non-condensing) |
| Protection | IP65 (Front Panel) |
Highlights the advanced technology, modular design, and user-friendly interface of the AI series controllers.
Explains the structure and meaning of the ordering codes used for AI series instruments.
Details the five module sockets (MIO, OUTP, ALM, AUX, COMM) and their functions for expanding controller capabilities.
Provides guidance on annual instrument maintenance, cleaning, and warranty information.
Describes the various display windows, indicators, and status messages on the controller's front panel.
Explains how to navigate menus, set values, and operate the instrument using its front panel controls.
Details the AI auto-tuning process for optimizing control parameters and its usage.
Covers the setup, run, hold, and stop functions for program operation on the AI-518P model.
A comprehensive list and explanation of all configurable parameters for the AI series instruments.
Provides detailed explanations of special functions like time proportional output and alarm blocking.
Explains the basic on/off control mode and alarm configuration for simple applications.
Details how the AI controller provides transmission output and acts as a program generator.
Describes the AI fuzzy logic control mode, high accuracy, and auto-tuning capabilities.
Introduces core concepts of the AI-518P program control, including program steps, time, and basic operations.
Explains the process of programming and editing control curves and sequences for the AI-518P instrument.
To Next Page
