YuJet Surfer - FIRST RIDE GUIDANCE; Preparing for Your First Ride; Activating and Riding the YuJet

To Next Page

To Previous Page

FIRST RIDE

We suggest your ﬁrst ride should be in Beginner mode

in a calm and open body of water. Choose your ﬁrst

ride locaon away from any dangers including choppy

water, people, and obstrucons.

1: Secure the remote wrist strap to your forward hand.

2: Secure the baery safety magnet to your wrist strap

or a loop on your life jacket.

3: Aim the board away from the shore and secure the

safety magnet to the top of the baery.

4: Power on the remote and wait for the remote to

connect indicated by a solid green Warn light. Also

verify that the board is in Beginner mode by indicang a

Blue EXP/BEG light.

5: To acvate the board; pull the trigger to the maximum

throle seng and release.

6: Apply smooth power unl you reach full speed. This

allows the board to become more stable. Remember

speed is also stability.