EasyManua.ls Logo

YUNEEC E-GO2 - E-GO2 Controller; Controller Operation and Status Indicators

YUNEEC E-GO2
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
7
START
7
8 9*
10
11
12
13
6
THE CONTROLLER
The EB24C is the smart controller of E-GO2,
a key feature of E-GO2 is without doubt its
sleek, pocket-sized, wireless controller
which allows you to intuitively control its
movements by simply sliding the throttle /
brake (7) up and down.
The battery status indicator light (9)
indicates the wireless controller's and
board’s battery status:
A green light indicates the board’s battery
status. Blue light indicates the controllers
battery status. Each light blinks 1,2,3 or 4
times in series. Each blink indicates 25% of
the total battery capacity.
When the board or controller's battery goes
under 25% of its maximum capacity, the
controller vibrates, its light will turn red and
blink 1 time. When charging - with the
controller connected to the board - a red
light indicates that the controller’s battery
charge is less 100%.
Example: (when activated but not charging)
the board's battery is completely empty and
the controller's battery has less than 75% of
its full charge capacity left 1 red blink will be
followed by 2 blue blinks.
(For more information on the yellow and purple warning
lights, reference troubleshoot page 19)

Other manuals for YUNEEC E-GO2

Related product manuals