7
charge status
indicator*
THE CHARGER
THE USB
THE PIN TOOL
*red = charging / green = charged
Use the USB cable to connect the wireless
controller to the board's USB port, to any
computer or any other USB port for
recharging purposes.
The E-GO2 charger allows you to fully
recharge the E-GO2 and the controller's
battery in 3 to 5 hours (depending on
charge left and ambient temprature)
giving you a maximum riding range of 30
km / 18 miles (depending on weight, road
conditions, riding style, etc...).
Also included with the E-GO2 is a small
pin-shaped tool, which allows you to
access the speed mode switch on the
controller and the bluetooth switch on the
the board .
Charge lead depending
on sales area
To Next Page
Loading...
