Option 2:
RTK GPS Station Binding:
The binding instruction of each RTG GPS Station will be attached with the GPS Station Kit. Please
refer to the corresponding sections to bind.
Take Off
OPTION 1
Press and hold the START/STOP button for
about 3 seconds to start the motors in angle
mode.
Slowly raise the left-hand stick to take off
OPTION 2
Tap the Take Off and slide on the screen to
take off. There is also a Landing soft key
beneath the takeoff soft key that may be used
for Auto-Landing.
Retract Landing Gears
Raise the landing gear control using the
landing gear control switch on the ST16E.
To Next Page
Loading...
