Z-CAM E2 Flagship Series User Manual

5K 6:5 /
6K 2.4:1/ 4K DCI / 4K UHD / 4K 2.4:1 /
Super16 (16:9) / FHD
23.98 / 24 / 25 / 29.97 / 50 / 59.94
Z CAM E2-F8
Resolution
Frame Rate（fps）
8K 2.4:1 / 8K UHD / 6K DCI / 6K UHD
23.98 / 24 / 25 / 29.97
4K UHD / Super16 (16:9)
23.98 / 24 / 25 / 29.97 / 50 / 59.94
 File format: MOV / MP4
 Split duration: 1 / 5 / 10 / 15 / 20 / 30 / 60 min. The camera will split the video with
the length set here automatically.
Note：After the first section via camera automatically splitting, the outofsyncproblem
between audio and video will happen. You need to use “Z CAM™ Video
Concatenator” to merge the video section before the post editing and processing. The
download link as below:
http://www.z-cam.com/cn/software-update/
 Time Code: Set the time code, there are sub-items as below:

Time Code Source: Internal / External

Time Code Value: Reset / Manual / Current
- Reset: Reset the time code value to 0.
- Manual Input: Set the time code value manually 00:00:00:00
（hour:minute:second:frame）.
- Current Time: Set time according to the camera system setting time.

Count Up: Rec Run / Free Run.
- Rec Run: Counts the time code only when recording video.
- Free Run: Counts the time code even when not recording video (including
when the camera is power off)

Time Code Mode: DF / NDF.
- DF: The camera modifies the difference between recorded time and time
code. Seconds and frames are separated by “.”. (Example: 00:00:00.00)

Z-CAM E2 Flagship Series Specifications

General

Brand	Z-CAM
Model	E2 Flagship Series
Category	Digital Camera
Language	English