Z-CAM E2 Flagship Series User Manual

 eND: (to be added later).
 Minimum ISO: This setting will only be enabled when ISO is set to “Auto”.
 Max ISO: This setting will only be enabled when ISO is set to “Auto”.
 Max Shutter Speed / Max Shutter Angle: This setting will be activated if Shutter
Speed / Shutter Angle is in Auto mode.
Max Shutter Speed:Auto/Manual （1” ~ 1/1600” ）*
Max Shutter Angle:Auto/Manual(1°~ 360°)
* Minimum shutter speed “1” is optional only when variable frame rate is set to “1”.
 Metering Mode: Center / Average / Spot, it sets the metering mode of exposure.
 Shutter Operation: Speed / Angle
 ISO Control: Fine / Native ISO
Fine: ISO can be set in detail value within ISO range (according to standard ISO
definition)
Native ISO: only native ISO can be selected.
 AE Speed: Slow / Normal / Fast
 Lock In Record: Off / On. Enable this function, it will automatically lock the exposure
during recording.
2.6. White B alance

Z-CAM E2 Flagship Series Specifications

General

Brand	Z-CAM
Model	E2 Flagship Series
Category	Digital Camera
Language	English