Z-CAM E2 Flagship Series User Manual

4) Set other required video parameters, except the Variable Framerate can not be
opened, the rest is the same as normal recording video.
5) Press Record button and the camera will start recording. Note that he recording time
shown on the screen is the time-length of the video file that is being recorded, but not
thetimeusedforrecording.
The formula to calculable the time required for recording and the time-length of the
video file is:
Recording time = Timelapse interval time x frame rate x time-length of video file
For example, if the timelapse interval is set to 0.5s and the recording frame rate is
25fps, then as to record 1 minute of timelapse video, the time required for recording
will be 0.5 x 25 x 1 =12.5 minutes.
4. Video Playback & File Management
4.1. Video Playback
WhilecameraisinStandby mode, short press Power button to enter into Playback
mode, on the LCD display there would list the file folders on the storage( CFast card or
external SSD).
Come into the folder then will show the thumbnail, video serial No. and the total number of
the latest video in the folder. Press Up / Down button to browse the footages inside the
folder.

Z-CAM E2 Flagship Series Specifications

General

Brand	Z-CAM
Model	E2 Flagship Series
Category	Digital Camera
Language	English