Mode: Auto / Incandescent / Cloudy / D10000 / Fluorescent / Daylight / Shade /
Manual
Kelvin: When White Balance is set to “Auto” or “Preset Value”, it shows the current
color temperature, when White Balance is set to “Manual”, it can be adjusted
manually (2300 K ~ 7500 K)
Tint: -100 ~ 100, default is 0.
Priority: Ambiance / White
-Ambiance: To increase the intensity of the image’s warm color cast when
shooting a tungsten-light scene.
-White: To reduce the intensity of the image’s warm color cast when shooting a
tungsten-light scene.
Lock In Record: Off / On. Enable this function, it will automatically lock the white
balance during recording.
* AWB always use white priority in Z-Log2
2.7. Focus
Focus Mode: MF (Manual Focus) / AF (Auto Focus)
Focus Area: Flexible Zone / Human Track. This will only be enabled when Focus
Mode is set to “Auto Focus”.
- Flexible Zone: Can move focus area via Up / Down button
- Human Track: The camera can detect whether there is a human body in the
To Next Page
Loading...
