Z-CAM E2 Flagship Series User Manual

 Record Indicator: On / Off. Set both front LED light and back LED light on / off
 Restore Lens Pos.: Disable / Enable.
When it’s set to “Enable”, the camera will remember the latest focusing position of
the lens when the camera is shut down and restore it when it’s powered on again
(with the same lens only).
 LCD Brightness: 10 ~ 100, default 50.
 Power: Auto Power Off / Auto Standby / Low Alarm / Power Output

Auto Power OFF
：
Off / 30s / 1min / 2mins / 4mins / 8mins / 15mins

Auto Standby: Off / 1min / 5mins / 15mins

Low Alarm: NP-F series battery / V Mount battery, Low alarm voltage value for
camera can be set for the different batteries.
- NP-F series battery：6.6V ~ 7.0V，Default as 6.8V
- V Mount Battery：13.1V ~ 13.5V，Default as 13.5V

Power Output: auxiliary power output,
DC 12V (2-pin LEMO socket) / 2A max.,
can supply power to other devices.
 Language
：简体中文
/ English
 Date / Time: Set the date and time of the camera.
 Time Zone: Set the time zone of the camera.
 Camera Status: Displays the current status of the camera, including storage
capacity (used and remaining space)
，
temperature (inside the camera)
，
firmware
version and camera ID etc.
 Version: Firmware version of the camera. If there is other version of firmware (newer

Z-CAM E2 Flagship Series Specifications

General

Brand	Z-CAM
Model	E2 Flagship Series
Category	Digital Camera
Language	English