6. Using Z Camera App
Download and install the Z Camera App from App Store to your device (smart phone or
tablet), then you can use this device to live view and control the camera including start /
stop recording and most of the settings, with following steps
Install App: Search "Z Camera" in App Store to download and install it.
Connect to camera: Connect the device to the camera with an USB Type C to Lighting
cable as below, or through Wi-Fi.
Wi-Fi connection refer to the section 5.1. The steps of USB connection are as follows:
1. Connect the device to the camera via USB cable
2. If it’s the 1
st
time to connect the device to the camera, there will be a pop-up
message on your device “Trust this device?”, click “Yes” and it will ask you to input
password, which is the password to unlock your iOS device.
3. Open ZCameraApp, if the camera is connected successfully, the “Control” icon will
be activated (it’s gray color if there is no connection) and there will be a small USB or
Wi-Fi icon on (depends the connection method you use). Click the “Control” icon and
you will come into the live-view and control panel.
To Next Page
Loading...
Need help?
General
