4
3. Enable WiFi on your mobile device and select the cameras WiFi network, entering
the password when prompted.
4. Once your mobile device is connected to the cameras WiFi, open the ‘Z-Verge’ app
on your mobile device and select ‘Connect.’
5. The app will automatically connect to the camera and open the app home page.
6. If connection fails please check your device is still connected to the camera network
or repeat steps 2 to 5.
NAVIGATION
Power/Mode Switch Button (1)
· Press and hold for 3 seconds to turn device ON/OFF.Power ON/OFF:
· In standby mode (camera inactive, not recording or capturing images) Switch Modes:
short press button to switch between:
Video Recording
Photo Capture
Slow Motion
Playback
Settings
Settings > Video
Settings > Photo
Settings > All Modes
Settings > General
Settings > Exit
Camera Modes
4K 30FPS
16M
1080P 60FPS
-
-
See ‘Video Recording’ mode
See ‘Photo Capture’ mode
See 'All Modes & General'
See 'All Modes & General'
-
Default Settings
To Next Page
Loading...
Need help?
General
