Z-Line Designs ZL581-36SU

Need help?

Do you have a question about the Z-Line Designs ZL581-36SU and is the answer not in the manual?

Summary

Important Information

Assembly Time and Preparation

Provides estimated assembly time and instructions for parts preparation before assembly.

Assembly Instructions

Step 1: Attaching Back Frame

Instructions for attaching the back frame to the left and right legs using Allen bolts.

Step 2: Connecting Frames and Supports

Connects middle and lower frames, and attaches glass supports with specific Allen bolts.

Step 3: Securing Top Glass Shelf

Secures top glass shelf with bolts and screws, and tightens all hardware.

Step 4: Placing Shelves and Caps

Places middle and lower glass shelves, and inserts side end caps into the back frame.

Product Specifications

Dimensions and Weight Capacity

Details product dimensions, maximum TV size, and weight limits for shelves.

Glass Handling Precautions

Provides critical safety advice for using and cleaning glass surfaces to prevent damage.

Limited Lifetime Warranty

Warranty Service Procedure

Explains how to obtain warranty service by contacting the dealer or customer service.

Customer Service Contact

Provides contact details for customer service representatives for warranty assistance.

This document provides assembly instructions and product information for the Z-Line Designs Cruise TV Stand, model ZL581-36SU. It is designed to be a functional and aesthetically pleasing unit for supporting televisions and other media components.

Function Description

The Z-Line Designs Cruise TV Stand is a multi-tiered furniture piece intended to hold a television and associated media devices. It features multiple shelves for storage and display, a back frame for structural integrity, and glass supports for the main shelves. The stand is designed for home use, providing a dedicated and stable platform for entertainment systems.

Important Technical Specifications

Dimensions:

Product Size: 36 inches (W) x 21-1/4 inches (D) x 27 inches (H)
Width: 36 inches
Depth: 21-1/4 inches
Height: 27 inches
Shelf Heights:
- Top shelf to middle shelf: 11-3/8 inches
- Middle shelf to lower shelf: 10-5/8 inches
- Distance from floor to lower shelf: 15 inches

Maximum Weight Capacities (EVENLY DISTRIBUTED):

Accommodates most LCD/Plasma TVs: up to 46 inches
Max weight for TV shelf: 150 Lbs.
Max weight for middle shelf: 65 Lbs.
Max weight for lower shelf: 65 Lbs.

Materials: The stand incorporates various materials, including:

Glass: Used for the top, middle, and lower shelves.
Metal: Likely used for the legs, back frame, and other structural components.
Plastic: Used for adhesive pads, side end caps, leg top end caps, leg bottom end caps, and back frame end caps.
Hardware: Includes various sizes of Allen bolts, machine screws, and an Allen wrench for assembly.

Parts Identification: The stand consists of the following main parts:

Left Leg (1 PC)
Right Leg (1 PC)
Back Frame (1 PC)
Glass Support (2 PCS)
Middle Frame (1 PC)
Lower Frame (1 PC)
Top Glass Shelf (1 PC)
Middle Glass Shelf (1 PC)
Lower Glass Shelf (1 PC)

Hardware Identification:

6x28x10mm ALLEN BOLT (AB62810S) - 4 PCS
6x35x10mm ALLEN BOLT (AB63510S) - 4 PCS
6x50x10mm ALLEN BOLT (AB65010S) - 2 PCS
6x70x10mm ALLEN BOLT (AB67010S) - 4 PCS
6x32x14mm ALLEN BOLT (AB63214S) - 2 PCS
4.5x13x10mm MACHINE SCREW (MS451310S) - 2 PCS
ALLEN WRENCH (AW4S) - 1 PC
SIDE END CAP - 2 PCS
PLASTIC ADHESIVE PAD - 8 PCS
NAME PLATE - 1 PC

Pre-assembled Parts (for reference only):

WIRE MANAGEMENT COVER - 2 PCS
LEG TOP END CAP - 2 PCS
LEG BOTTOM END CAP - 2 PCS
BACK FRAME END CAP - 2 PCS

Usage Features

Assembly:

Estimated Assembly Time: 30 minutes.
Personnel Required: Only one person is necessary for assembly, but one or more steps may require a second person to assist.
Tools Required: Phillips Head Screwdriver (not included) and Allen Wrench (included).
Assembly Process: The manual provides a step-by-step guide with diagrams. Key steps involve attaching legs to the back frame, connecting middle and lower frames, securing glass supports, and finally placing the glass shelves.
Tightening Instructions: Specific instructions are given for when to "DO NOT FULLY TIGHTEN ALLEN BOLTS" (until the end of Step 3) and when to "FULLY TIGHTEN." This ensures proper alignment during assembly.
Glass Support Adjustment: The glass supports are designed to swing freely and adjust slightly to fit properly into the cylinders on the top glass shelf.
Name Plate: A Z-Line Designs name plate with adhesive backing is provided to be adhered to a shelf, allowing for careful placement.

Safety Features and Warnings:

Weight Distribution: The product is intended to hold the maximum weight evenly distributed. Exceeding this limit can lead to instability and potential injury.
Glass Safety:
- Stop using the product immediately if the glass is chipped or broken and consult the manufacturer or supplier.
- Avoid placing very hot or very cold items directly on glass surfaces without adequately thick table mats.
- Do not sit or stand on the glass surfaces.
- Do not use the glass as a chopping surface.
- Do not strike the glass with hard or pointed items.
Customer Service: Users are instructed not to return the product to the store if parts are missing or damaged. Instead, they should contact Z-Line Designs customer service directly via a toll-free number or email.

Design:

The "Cruise" design suggests a modern and possibly minimalist aesthetic, suitable for contemporary living spaces. The use of glass shelves contributes to an open and airy feel.
The inclusion of wire management covers (pre-assembled) indicates consideration for cable organization, helping to maintain a tidy appearance.

Maintenance Features

Cleaning:

Glass Cleaning: Use a liquid glass surface cleanser and a soft cloth. Avoid harsh powders or abrasive substances, as they will scratch the glass.

Parts Replacement and Inquiries:

Contact Information: Toll-Free: 1-888-736-2141 or Email: CustomerService@Z-LineDesigns.com.
Information Required for Timely Delivery of Parts:
1. Full Name
2. Physical Address (FedEx will not deliver to P.O. Boxes)
3. Phone Number
4. QC Number (e.g., SW_____)
5. ZLN Number (ZL581-36SU)
6. Part Number(s) or Letter(s)
7. Quantity
8. Brief description of the reason for the request.
Customer Service Hours: Monday - Friday, 7:00 am to 3:30 pm Pacific Standard Time (Except Holidays).

Warranty:

Limited Lifetime Warranty: Z-Line Designs offers a limited lifetime warranty to the original purchaser, covering defects in material or workmanship.
Warranty Scope: Repairs or replacements are at Z-Line Designs' sole discretion. The warranty does not cover damage caused by carriers, modifications, non-approved attachments, non-standard materials, or improper installation/use/maintenance.
Specific Component Coverage:
- Five Years: Glides, casters, user-adjustable work surface mechanisms, laminates, veneer finishes, and other materials covering the product.
Color Variations: Natural variations in wood or other natural materials are not considered defects. Z-Line Designs does not warrant color-fastness or matching of colors, grains, or textures.
Obtaining Service:
1. Contact the local Dealer from whom the product was purchased within 30 days of defect discovery. Provide proof of original purchase and product information (serial/UPC numbers).
2. The Dealer will inspect the product and contact Z-Line Designs Customer Service.
3. If eligible under warranty, Z-Line Designs will determine whether to provide replacement parts or other arrangements. Assembly/labor is not included in the warranty.
Customer Service for Warranty: Toll-Free 1-888-736-2141 or Email customerservice@z-linedesigns.com, or contact the local dealer. Be prepared to provide detailed defect description, model/style number, purchase date/location, name, address, phone number, and original sales receipt.