Need help?Do you have a question about the Z-Wave ZTS-500 and is the answer not in the manual?
Step-by-step guide for mounting the thermostat housing and connecting wires.
Explains the use and configuration of the RC/RH jumper for HVAC system transformers.
Wiring configurations for non-heat pump HVAC systems, including multi-stage and single-stage.
Wiring configurations for heat pump HVAC systems, including multi-stage and single-stage.
Guides users through selecting pump system types (Non-Heat Pump or Heat Pump).
Describes thermostat operation for heating and cooling requests in non-heat pump systems.
Describes thermostat operation for heating and cooling requests in heat pump systems.
Step-by-step guide for including the ZTS-500 into a Z-Wave network.
Step-by-step guide for excluding the ZTS-500 from a Z-Wave network.
General| Type | Thermostat |
|---|---|
| Z-Wave Compatibility | Yes |
| Power Supply | 2 x AA Batteries |
| Display | LCD |
| Thermostat Type | Programmable |
| Communication Protocol | Z-Wave |
| Device Type | Z-Wave Thermostat |
| Power Source | Battery |
| Temperature Range | 5°C to 35°C (41°F to 95°F) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Operating Humidity | 5% to 95% RH |
| Z-Wave Frequency | 908.42 MHz |
| Compatibility | Z-Wave certified |
To Next Page
