5. ON THE iPAD®, SELECT:
SETTINGS > GENERAL > BLUETOOTH > ON.
6. IF YOU SEE ZAGGkeys PRO/PROplus LISTED AS AN
“AVAILABLE DEVICE” ON YOUR iPAD®, CLICK
ON THE ARROW TO THE RIGHT AND CHOOSE
TO HAVE YOUR iPAD® “FORGET THE DEVICE.”
7. CLICK PAIR BUTTON ON ZAGGkeys PRO/PROplus
AND WATCH FOR THE CAPS LOCK LIGHT TO
FLASH.
8. YOU SHOULD SEE ZAGGkeys PRO/PROplus
LISTED AS AN “AVAILABLE DEVICE.”
9. SELECT ZAGGkeys PRO/PROplus BY TOUCHING
IT ON YOUR iPAD®.
10. YOUR ZAGGkeys PRO/PROplus SHOULD
NOW BE PAIRED.
11. IF YOUR iP
AD® GIVES YOU AN ERROR MESSAGE,
REPEAT PROCESS AGAIN.
12. IF YOU STILL CAN’T GET YOUR ZAGGkeys
PRO/PROplus TO PAIR, IT IS POSSIBLE YOUR iPAD®
NEEDS TO HAVE ITS SOFTWARE UPDATED.
13. IF BACKLIGHTING IS NOT OPERATING: BATTERY
MAY NEED TO BE CHARGED AS BACKLIT KEYS
WILL NOT OPERATE WHEN BATTERY LIFE
FALLS BELOW 20%.
To Next Page
Loading...
