Zagg Pro - Troubleshooting and Lights; iPad Not Responding

POWERING ON AND PAIRING YOUR
ZAGGkeys PRO/PROplus
THE ZAGGkeys PRO/PROplus’s BLUETOOTH
KEYBOARD SHOULD ONLY NEED TO PAIR TO
YOUR iPAD® ONCE AS FOLLOWS:
1. ON THE ZAGGkeys PRO/PROplus, SLIDE THE
POWER BUTTON ON. THE BLUE CAPS LOCK
LIGHT WILL ILLUMINATE FOR FOUR SECONDS
AND THEN TURN OFF TO SAVE POWER. YOUR
ZAGGkeys PRO/PROplus IS STILL ON.
2. PRESS THE PAIR BUTTON AND THE CAPS
LOCK LIGHT WILL FLASH INDICATING THAT
YOUR PRO/PROplus IS READY TO PAIR.
3. ON THE iPAD®, SELECT: SETTINGS >
GENERAL > BLUETOOTH > ON.
4. THE CAPS LOCK LIGHT WILL FLASH ON THE
PRO/PROplus AND THE iPAD®
WILL DISPLAY
“ZAGGkeys PRO/PROplus” AS AN AVAILABLE
DEVICE.
5. SELECT “ZAGGkeys PRO/PROplus” ON THE
iPAD®; TO PAIR.
6. YOUR iPAD® AND PRO/PROplus WILL
AUTOMATICALLY PAIR.