⑤
Attach the Backplate assembly to
the back side of the motherboard by
aligning the Nuts to the
motherboard mounting holes.
If you were unsuccessful at first
attempt, you may continue with the
installation without the Double-sided
Tape as it is not a necessary
component.
⑥
Apply thermal grease just enough to thinly cover the CPU surface, then
fasten the Bolts to isntall the cooler.
⑦
Latch the Fan Fixing Clips to the notches located on the sides of the heatsink.
Note: It is often easier to latch the Fan Fixing Clips one at a time.
To Next Page