ZALMAN CNPS10X Optima (2011) - Page 6

6
.COM
English
1
2
②
Install the Bolts to the Backplate according to the socket type and
secure them with Side Caps.
※
Backplate is not needed for LGA 2011 V3 / 2011 sockets.
Socket 775
Socket 1156/1155/1151/1150
Socket 1366
Take note of the orientation of the Nuts and the Side Caps.
X
O
Caution
③ - ⓐ
Socket 1366/1156/1155/1151/1150 Installation
Peel off one side of the Double-sided Tape and attach it to the center of the Backplate
with the sticky side facing down. Then, peel off the top cover.
※
Socket 1366/1156/1155/1151/1150 Installation does not require the Loading Block.