Information on transportation packaging
8 Multitronic-Retrofit Kit_01_2004-06-16
Transportation and storage
The manufacturer will not be liable for any damage caused by incorrect storage
or incorrect transportation. Please note therefore the following instructions.
Information on transportation packaging
The control system is supplied in a sturdy cardboard box.
If the packaging is undamaged
► Leave the system in the undamaged packaging until all preparations for the
installation are completed.
What to do in the case of transport damage occurring?
► Check whether only the packaging or the control system itself were
damaged.
► If any damage is found, please contact the manufacturer immediately to file a
damage report. The telephone number is found on page 2.
Warning!
A damaged control system must not be taken into operation! Damaged
components may lead to functional faults and possibly cause further
damage.
Storing the control system
If the control system is to be stored for an extended period of time, the storage
location must meet the following conditions:
Store device in dry room and protect it against dust.
Ensure that the ambient temperature is between +1 °C and +50 °C.
To Next Page
Loading...