Technical product description
Multitronic-Retrofit Kit_01_2004-06-16 7
Technical product description
The Multitronic Retrofit Kit is a complete control unit designed for installation
(retrofitting or replacement) and use in most compressed air adsorption dryer
models with cold regeneration. It is suitable for dryers with 1 or 2 blow-off valves
(3-valve or 4-valve models) as well as for dryers equipped with an additional
pressure build-up valve (5-valve models). Whether the dryer is controlled directly
or by means of pilot valve is thus not relevant.
The control system is factory-configured to suit the dryer type, whereby the
necessary relays are installed and the cycle times, supply voltage and signal
contacts are adjusted.
The Multitronic Retrofit Kit is a compact assembly whose components are not
available as separate spare parts.
The Multitronic Retrofit Kit Plus consists of the standard kit and additional
components for the measuring of the dewpoint.
For more information, please refer to the included summary operating manual of
the Multitronic system.
To Next Page
Loading...