1. INTRODUCTION
Dear Customer,
We would like to thank you for purchasing our product.
We provide this manual to ensure the distribution of all important information for your
safety, optimal profit and product lifetime.
Please read the instructions carefully before installing or operating the product.
The safety and instructions in this manual must be followed to ensure that
installation, commissioning, operation and maintenance are safe and in accordance
to (local) standards and regulations..
Our technical department can provide additional information and support.
If you have any questions, please contact us.
Phone general: +31(0)297 – 219 100
Phone service: +31(0)297 – 219 125
E-mail: info@zantingh.com
2. REGULATION
BELANGRIJK:
IMPORTANT:
A certified heating or electrical installer should instal the product. The instructions
meet the applicable (local) standards and regulations. Please contact your Zantingh
representative or local service department in case of doubt.
3. IMPORTANT NOTES
- Commissioning a Zantingh burner ought to be performed with the utmost
precision and by Zantingh authorized personnel.
- Any commissioning work or change of settings of the burner system by somebody
other than by the people mentioned above, can lead to a dangerous situation and
have consequences on product liability and warranty.
- Changes to the burner system may only be implemented conform instructions
after receiving confirmation in writing from Zantingh.
- A burner system is a combination of:
• Electrical engineering
• Gas engineering
• Central heating engineering
• Measurement and control engineering
- Take care of your burner system as if it is the heart of your company. Restrict
authorization to trained personnel only.
To Next Page
Loading...