Need help?Do you have a question about the ZANTINGH RKB and is the answer not in the manual?
Recommends annual inspection and servicing by a qualified service engineer for safe operation.
Advises understanding burner and system types from the nameplate for better manual comprehension.
Details the burner housing, air valve, servomotor, combustion devices, and ignition system.
Explains the air fan's role in combustion air supply, its connection, and control.
Covers the gas supply control system, including safety valves and pressure regulators.
Describes the components of the pilot gas line, including shut-off and solenoid valves.
Explains the control panel's function in managing system operation and monitoring various circuits.
Details the function of switches and buttons on the control panel for operation and fault reset.
Describes how the control panel manages air fan speed via a frequency control unit.
Explains operating and programming the LMV5 using AZL5, including its display, diagnostics, and parameter settings.
Details AZL5 buttons, display, setpoint changes, and temperature settings for user interaction and configuration.
Describes the 7" touch screen interface for burner status, system information, and various operational displays.
Presents touch screen displays for setpoint/actual values, logs, and system data.
Shows touch screen displays for service notes, trends, and combustion data.
Displays touch screen information on actuators, inputs, and outputs status.
Guides on configuring limited maximum load settings via the touch screen interface for operational control.
Details checks for leaks in safety and pilot valves before and during burner start, listing causes and checks.
Explains how low gas pressure triggers lockout and lists potential causes and checks.
Describes the function of the maximum gas pressure switch in preventing boiler overload and lists causes.
Explains motor overload protection via relays and the manual reset procedure.
Covers monitoring air pressure and potential causes for low pressure, including fan inlet checks.
Explains protection against high temperatures/pressure, lockout triggers, and manual reset.
Details water level monitoring to prevent overheating damage, describing safety devices and causes.
Addresses failure due to high water temperature in the flue gas condenser, including circulation checks.
Explains monitoring condenser backpressure for contamination and necessary checks.
Describes MM error indication on Autoflame module, advising to record error code before resetting.
Covers frequency control errors, the 'F' symbol code, and warnings about contacting service.
General| Brand | ZANTINGH |
|---|---|
| Model | RKB |
| Category | Indoor Fireplace |
| Language | English |
To Next Page