Zanussi NHT8 - User Manual

Warewashing
Hood Type Dishwasher
ITEM #
MODEL #
NAME #
SIS #
AIA #
Short Form Specification
Item No.
APPROVAL:
Zanussi Professional
www.zanussiprofessional.com
zanussiprofessional@electrolux.com
Warewashing
Hood Type Dishwasher
Warewashing
Hood Type Dishwasher
505071 (NHT8)Hood Type Dishwasher,
Single skin hood and Rinse
aid dispenser, 80r/hr - 400
V/3N/50 Hz
Upright hood type dishwasher. Uses 2 liters of clean water per final rinse
cycle. 84°C rinse temperature and pressure guaranteed by built in
atmospheric boiler and built in rinse booster pump. Washing
performance is guaranteed by a powerful 0.8 kW wash pump and upper
and lower stainless steel revolving washing spray arms. 304 Stainless
steel construction to include single skin hood, external, front and side
panels, wash tank, tank filter plus wash and rinse arms. Unit shall be field
convertible from straight to corner operation. The unit shall include rinse
aid dispenser pump and is equipped with flexible fill hoses. Delivered on
height-adjustable feet.
Main Features
•ETL-Sanitation approved (ANSI/NSF 3 sanitation standard)
and DIN 10512 compliant.
•Requires only 2 liters of water per washing cycle thus
ensuring low energy, water, detergent and rinse aid
consumption.
•Built-in atmospheric boiler sized to raise incoming water
to a minimum of 84 °C for sanitizing rinse. No external
booster is required. Constant temperature of 84 °C
throughout the rinsing cycle regardless of the network's
water pressure.
•Unique temperature interlock guarantees required
temperatures in both the wash and final rinse.
•Maximum capacity per hour of 80 racks or 1.440 dishes
(High productivity mode) easy to switch to 63 racks or
1.134 dishes (ETL-Sanitation mode) by pressing a button.
•45/84/150 seconds cycles (High productivity mode);
57/84/150 seconds cycles (ETL-Sanitation mode).
•Incorporated Soft Start feature to offer additional
protection to more delicate items.
•Slanted wash arms to avoid detergent-filled wash water
dropping on clean dishes after the rinsing phase, thus
guaranteeing ideal washing results.
•Cycle may be interrupted at any time by lifting the hood.
•Automatic self-cleaning cycle and self-draining vertical
wash pump and boiler to avoid bacteria proliferation.
•State-of-the-art electronic controls with built-in
programming, self-diagnostics for serviceability and
automatic interior self-cleaning cycle.
•Built-in rinse aid dispenser with automatic initial and
continuous cycle loading for perfect result while
minimizing service and maintenance needs.
•Boiler power setting from control panel to facilitate
technician's operation when reducing total installed
power, thus avoiding the need of machine opening.
•Three phase electrical connection, convertible to single
phase on-site.
•IP25 protection against water jet, solid objects and small
animals (larger than 6 mm).
Construction
•Heavy duty Stainless steel construction. Internal cavity as
well as exterior panels are in 304 series Stainless steel.
•Pressed tank in front position to facilitate cleaning.
•Single skin hood supported by 3 springs to ensure
smooth movement and guarantee operator safety.
•Specially designed Stainless steel wash/rinse arms and
nozzles provide superior cleaning action.
•Revolving interchangeable Stainless steel wash/rinse arms
above and below the rack, screw out for simple clean up.
•Pre-arranged for on-site HACCP implementation and
Energy Management device.
•Element protection from dry fire and low water.

Summary

Main Features

ETL-Sanitation Approval and Compliance

ETL-Sanitation approved (ANSI/NSF 3) and DIN 10512 compliant, ensuring safety and standards.

Low Water Consumption

Utilizes only 2 liters of water per cycle for reduced energy, water, and detergent use.

Built-in Atmospheric Boiler for Sanitizing Rinse

Ensures 84°C rinse temperature with constant pressure, eliminating need for external booster.

Temperature Interlock System

Guarantees required wash and final rinse temperatures for optimal results.

High Productivity Cycles

Offers 80 racks/hr (High Productivity) or 63 racks/hr (ETL-Sanitation) via button selection.

Slanted Wash Arms

Automatic Self-Cleaning and Draining

Electronic Controls and Self-Diagnostics

Features programming, diagnostics, and automatic interior self-cleaning.

Built-in Rinse Aid Dispenser

Short Form Specification

Unit Description and Performance

Upright hood type dishwasher using 2L water per final rinse, with 84°C rinse temp & pressure.

Washing Power and Spray Arms

Material and Construction

Technical Specifications - Electric

Supply Voltage and Convertibility

Installed Power Ratings

Default 9.9 kW, reducible to 6.9 kW, with boiler elements at 9 kW.

Component Power

Technical Specifications - Water

Water Supply Temperature and Pressure

Water Consumption

Uses 2 liters per cycle, with boiler capacity of 12L and tank capacity of 24L.

Technical Specifications - Key Information

Cycle Information

3 cycles available: High Productivity (45/84/150s) and Thermal Label Compliant (57/84/150s).

Productivity Rates

80 racks/hr (1440 dishes/hr) High Productivity, 63 racks/hr (1134 dishes/hr) Thermal Compliant.

Temperature Requirements

Wash temp 55-65°C (High Prod.) or min 75°C (Thermal Compliant), rinse temp min 84°C.

Zanussi NHT8 Specifications

General

Brand	Zanussi
Model	NHT8
Category	Dishwasher
Language	English