Zanussi ZDLN1511 User Manual (English)

Questions and Answers:

N
nicholas01Aug 18, 2025
What to do if my Zanussi ZDLN1511 Dishwasher doesn't fill with water?
- C
  Christopher ToddAug 18, 2025
  If your Zanussi Dishwasher isn't filling with water, there are several things you can check: * Ensure that the water tap is fully open. The indicator will flash 1 time intermittently and an acoustic signal will sound 1 time intermittently if this is the issue. * Verify that the water supply pressure isn't too low by contacting your local water authority. * Make sure the water tap and the filter in the inlet hose are not clogged. * Confirm that the inlet hose has no kinks or bends.
C
Carol CoxAug 20, 2025
Why is my Zanussi Dishwasher not draining water?
- C
  Carlos BrownAug 21, 2025
  If your Zanussi Dishwasher isn't draining water, here are a few things to check. The indicator will flash 2 times intermittently and an acoustic signal will sound 2 times intermittently if this is the issue. First, make sure that the sink spigot is not clogged. Also, ensure that the interior filter system isn't clogged and that the drain hose has no kinks or bends.
J
Jessica ScottAug 23, 2025
How to fix Zanussi ZDLN1511 Dishwasher that won't turn on?
- M
  mgravesAug 23, 2025
  If your Zanussi Dishwasher won't activate, make sure that the mains plug is correctly connected to the mains socket and that there is no damaged fuse in the fuse box.
K
Kristina MontesAug 26, 2025
What to do if Zanussi Dishwasher program won't start?
- M
  Maria JonesAug 26, 2025
  If the program on your Zanussi Dishwasher isn't starting, check these things: Ensure the appliance door is fully closed. If the delay start is set, either cancel it or wait for the countdown to finish. Also, the appliance may be recharging the resin inside the water softener, which takes about 5 minutes.
J
jessicaperkinsAug 28, 2025
What to do if water level is too high in Zanussi ZDLN1511 Dishwasher?
- M
  Michael AllenAug 28, 2025
  If the water level inside your Zanussi Dishwasher is too high (The indicator flashes 15 times intermittently and acoustic signal sounds 15 times intermittently), try switching the appliance off and on. Also, make sure that the filters are clean and that the outlet hose is installed at the correct height above the floor, according to the installation instructions.
J
jamesreidAug 30, 2025
Why does my Zanussi ZDLN1511 keep tripping the circuit breaker?
- D
  Dana MahoneyAug 30, 2025
  If your Zanussi Dishwasher is tripping the circuit-breaker, it could be due to insufficient amperage to supply all appliances in use simultaneously. Check the socket amperage and the capacity of the meter, or turn off one of the other appliances in use. Alternatively, there may be an internal electrical fault with the appliance.
S
smithlindaSep 2, 2025
What to do if Zanussi Dishwasher water level sensor malfunctions?
- M
  marymorenoSep 2, 2025
  If there's a malfunction of the water level detection sensor in your Zanussi Dishwasher (The indicator flashes 4 times intermittently and acoustic signal sounds 4 times intermittently), make sure that the filters are clean. If that doesn't work, try switching the appliance off and on.
A
Amber MelendezSep 4, 2025
What to do if Zanussi ZDLN1511 Dishwasher water temperature is too high?
- D
  Dylan CookSep 4, 2025
  If the water temperature inside your Zanussi Dishwasher is too high or there's a malfunction of the temperature sensor (The indicator flashes 6 times intermittently and acoustic signal sounds 6 times intermittently), make sure that the inlet water temperature does not exceed 60°C. If the issue persists, switch the appliance off and on.
D
David BernardSep 7, 2025
How to fix Zanussi ZDLN1511 wash pump malfunction?
- S
  ssmithSep 7, 2025
  If there's a malfunction of the wash pump or the drain pump in your Zanussi Dishwasher (The indicator flashes 5 times intermittently and acoustic signal sounds 5 times intermittently), try switching the appliance off and on.
S
Shannon BrownSep 9, 2025
How to stop rattling sounds in Zanussi ZDLN1511 Dishwasher?
- P
  Phillip NewtonSep 10, 2025
  If you're hearing rattling or knocking sounds from inside your Zanussi Dishwasher, it's likely due to the tableware not being properly arranged in the baskets. Refer to the basket loading leaflet for guidance. Also, make sure that the spray arms can rotate freely.

Zanussi ZDLN1511 Specifications

General

Cycle time	227 min
Noise level	49 dB
Drying system	AirDry
AquaStop function	-
Delay start (max)	3 h
Inverter technology	Yes
Dishwashing programs	90min, 160min 60°C, Eco 50°C, Pre-wash, Quick
Left-on mode duration	1 min
Number of place settings	13 place settings
Number of washing programs	5
Number of temperature settings	3
Door color	Not applicable
Cord length	1.5 m
Display type	LED
Product size	Full size (60 cm)
Appliance placement	Fully built-in
Control panel color	White
Cutlery compartment type	Basket
Current	10 A
Connected load	1950 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Power consumption (off)	0.5 W
Water consumption per cycle	9.9 L
Energy consumption per cycle	1.039 kWh

Weight and Dimensions

Depth	550 mm
Width	596 mm
Height	818 mm
Installation compartment width	600 mm
Installation compartment height	880 mm
Installation compartment height (min)	820 mm

Summary

SAFETY INFORMATION

CHILDREN AND VULNERABLE PEOPLE SAFETY

Safety guidelines for children and vulnerable individuals using the appliance.

GENERAL SAFETY

General safety precautions for the intended household and similar use of the appliance.

SAFETY INSTRUCTIONS

INSTALLATION

Instructions and warnings for installing the dishwasher safely and correctly.

ELECTRICAL CONNECTION

Warnings and guidelines for connecting the appliance to the electrical supply.

WATER CONNECTION

Important information and precautions for connecting the appliance to the water supply.

USE

PRODUCT DESCRIPTION

An overview of the dishwasher's components and general product information.

CONTROL PANEL

CONTROL PANEL OVERVIEW

Identification and description of the dishwasher's control panel buttons and indicators.

INDICATORS

Explanation of the different indicator lights on the control panel and their meanings.

PROGRAMMES

PROGRAMME DESCRIPTIONS

Details on available wash programmes, their type of load, degree of soil, and phases.

CONSUMPTION VALUES

PROGRAMME SELECTION AND USER MODE

How to select programmes and access user mode settings.

SETTINGS

THE WATER SOFTENER

Explanation of the water softener function and how to adjust it based on water hardness.

REGENERATION PROCESS

Description of the automatic regeneration process for the water softener device.

SET WATER SOFTENER LEVEL

Step-by-step guide on how to adjust the water softener level.

RINSE AID NOTIFICATION AND ACOUSTIC SIGNALS

How to manage rinse aid notifications and activate/deactivate programme end signals.

AIRDRY FUNCTION

Explanation of the AirDry function for improved drying with less energy consumption.

DEACTIVATE AIRDRY

Steps to disable the automatic door opening feature during the drying phase.

BEFORE FIRST USE

FILLING SALT CONTAINER

Detailed instructions for filling the salt container correctly.

SALT CONTAINER INFORMATION

Information about the salt container and the type of salt to use.

FILLING RINSE AID DISPENSER

Guide on filling the rinse aid dispenser, including quantity adjustment.

DAILY USE

USING THE DETERGENT

Instructions for adding detergent, including specific types and compartment usage.

PROGRAMME SELECTION AND OPERATION

STARTING AND MANAGING PROGRAMMES

How to start, delay, cancel programmes and manage door operations.

GENERAL USAGE AND TIPS

OPTIMIZING PERFORMANCE AND EFFICIENCY

Tips for optimal cleaning, energy saving, and understanding auto-off/end of programme features.

USING WASHING AIDS

SALT, RINSE AID, AND DETERGENT USAGE

Guidance on using salt, rinse aid, and detergent, including multi-tabs and water hardness adjustment.

LOADING AND UNLOADING

BASKET LOADING AND UNLOADING PROCEDURES

Recommendations for proper item arrangement in baskets and safe unloading.

PREPARING FOR A PROGRAMME

ESSENTIAL PRE-PROGRAMME CHECKS

Key checks before starting a wash cycle, including filters, spray arms, and supply levels.

CARE AND CLEANING

CLEANING THE FILTERS

Detailed steps for disassembling, washing, and reassembling the dishwasher's filter system.

SPRAY ARM AND EXTERNAL CLEANING

Instructions for cleaning the spray arms and the exterior of the appliance.

INTERNAL CLEANING AND MAINTENANCE

Recommendations for maintaining the appliance's interior performance with specific cleaning products.

REMOVAL OF FOREIGN OBJECTS

How to remove foreign objects from filters and sump to prevent damage and ensure performance.

TROUBLESHOOTING

COMMON PROBLEMS AND SOLUTIONS

A table listing common issues, alarm codes, and their corresponding causes and solutions.

ALARM CODES AND MALFUNCTIONS

Troubleshooting specific malfunctions indicated by alarm codes and indicator flashes.

APPLIANCE OPERATION ISSUES

Troubleshooting issues related to door closure, noise, circuit tripping, and general operation.

WASHING AND DRYING RESULTS

UNSATISFACTORY RESULTS

Solutions for common problems like poor washing or drying, and streaks on dishes.

SPECIFIC RESULT PROBLEMS

Addressing issues like water spots, wet dishes, foam, rust, detergent residue, and odors.

TECHNICAL INFORMATION

ENVIRONMENTAL CONCERNS

Information on recycling packaging and proper disposal of the appliance.

Related product manuals

Zanussi ZDLN1511 User Manual

Table of Contents

Questions and Answers:

Zanussi ZDLN1511 Specifications

Summary

SAFETY INFORMATION

CHILDREN AND VULNERABLE PEOPLE SAFETY

GENERAL SAFETY

SAFETY INSTRUCTIONS

INSTALLATION

ELECTRICAL CONNECTION

WATER CONNECTION

USE

PRODUCT DESCRIPTION

CONTROL PANEL

CONTROL PANEL OVERVIEW

INDICATORS

PROGRAMMES

PROGRAMME DESCRIPTIONS

CONSUMPTION VALUES

PROGRAMME SELECTION AND USER MODE

SETTINGS

THE WATER SOFTENER

REGENERATION PROCESS

SET WATER SOFTENER LEVEL

RINSE AID NOTIFICATION AND ACOUSTIC SIGNALS

AIRDRY FUNCTION

DEACTIVATE AIRDRY

BEFORE FIRST USE

FILLING SALT CONTAINER

SALT CONTAINER INFORMATION

FILLING RINSE AID DISPENSER

DAILY USE

USING THE DETERGENT

PROGRAMME SELECTION AND OPERATION

STARTING AND MANAGING PROGRAMMES

GENERAL USAGE AND TIPS

OPTIMIZING PERFORMANCE AND EFFICIENCY

USING WASHING AIDS

SALT, RINSE AID, AND DETERGENT USAGE

LOADING AND UNLOADING

BASKET LOADING AND UNLOADING PROCEDURES

PREPARING FOR A PROGRAMME

ESSENTIAL PRE-PROGRAMME CHECKS

CARE AND CLEANING

CLEANING THE FILTERS

SPRAY ARM AND EXTERNAL CLEANING

INTERNAL CLEANING AND MAINTENANCE

REMOVAL OF FOREIGN OBJECTS

TROUBLESHOOTING

COMMON PROBLEMS AND SOLUTIONS

ALARM CODES AND MALFUNCTIONS

APPLIANCE OPERATION ISSUES

WASHING AND DRYING RESULTS

UNSATISFACTORY RESULTS

SPECIFIC RESULT PROBLEMS

TECHNICAL INFORMATION

ENVIRONMENTAL CONCERNS

Related product manuals