EasyManua.ls Logo

Zanussi ZDLN5521 - User Manual

Zanussi ZDLN5521
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GETTING
STARTED?
EASY.
User Manual
ZDLN5521
EN User Manual 2
Dishwasher
DE Benutzerinformation 23
Geschirrspüler

Questions and Answers

  • P
    Patricia GarrisonAug 20, 2025
    What to do if my Zanussi ZDLN5521 Dishwasher doesn't fill with water?
    • T
      Thomas HernandezAug 20, 2025
      If your Zanussi Dishwasher isn't filling with water, the lights related to the programme buttons may flash 1 time intermittently, accompanied by an intermittent acoustic signal. First, ensure that the water tap is fully open. Also, the pressure of the water supply might be too low or the water tap could be clogged. Check that the filter in the inlet hose isn't clogged and that the inlet hose has no kinks or bends.
  • D
    Deanna HarrisAug 22, 2025
    Why Zanussi Dishwasher programme lasts too long?
    • I
      ipeckAug 22, 2025
      If your Zanussi Dishwasher programme is running longer than expected, check if the delay start option is activated. If it is, cancel the delay setting or wait for the countdown to finish. Also, activating Extra Power increases the programme duration.
  • R
    Randy CarpenterAug 25, 2025
    What to do if my Zanussi Dishwasher has small leak?
    • J
      Jodi MayAug 25, 2025
      If there's a small leak from the door of your Zanussi Dishwasher, the appliance might not be leveled. Loosen or tighten the adjustable feet. Also, the appliance door might not be centered on the tub; adjust the rear foot.
  • C
    Christopher MarquezAug 27, 2025
    What to do if Zanussi ZDLN5521 has malfunction of the water level detection sensor?
    • E
      Edward MartinAug 27, 2025
      If there's a malfunction of the water level detection sensor in your Zanussi Dishwasher, the lights related to the programme buttons may flash 4 times intermittently. Make sure that the filters are clean. If that doesn't work, try switching the appliance off and on.
  • R
    Ryan MullinsAug 28, 2025
    How to fix Zanussi Dishwasher tripping the circuit-breaker?
    • T
      Tina LarsenAug 28, 2025
      If your Zanussi Dishwasher is tripping the circuit-breaker, the amperage might be insufficient to supply all appliances in use simultaneously. Check the socket amperage and the capacity of the meter, or turn off one of the appliances in use. If this does not help, this could indicate an internal electrical fault of the appliance, and you should contact an Authorised Service Centre.
  • O
    oclayAug 30, 2025
    What to do if I cannot activate my Zanussi ZDLN5521?
    • A
      Amy WilliamsAug 30, 2025
      If you cannot activate your Zanussi Dishwasher, ensure that the mains plug is correctly connected to the mains socket and check that there is no damaged fuse in the fuse box.
  • H
    hbryantSep 1, 2025
    What to do if Zanussi Dishwasher door is difficult to close?
    • M
      Mrs. Jennifer DunlapSep 1, 2025
      If the door of your Zanussi Dishwasher is difficult to close, it might not be leveled correctly. Try loosening or tightening the adjustable feet. Also, check whether parts of the tableware are protruding from the baskets.
  • T
    Tracy TrujilloSep 3, 2025
    How to stop anti-flood device on Zanussi ZDLN5521?
    • J
      johnny30Sep 3, 2025
      If the anti-flood device on your Zanussi Dishwasher is activated, the lights related to the programme buttons may flash 3 times intermittently, accompanied by an intermittent acoustic signal. Close the water tap. Also, ensure that the appliance is correctly installed and the baskets are loaded as instructed in the user manual.
  • C
    cweberSep 5, 2025
    Why Zanussi ZDLN5521 Dishwasher programme does not start?
    • N
      Nicolas WilliamsSep 5, 2025
      If the Zanussi Dishwasher programme does not start, ensure that the appliance door is closed properly. If the delay start is set, cancel the setting or wait for the end of the countdown. Also, the appliance may be recharging the resin inside the water softener, which takes approximately 5 minutes.
  • A
    amanda96Sep 7, 2025
    How to fix rattling sounds in Zanussi ZDLN5521?
    • S
      Suzanne Higgins MDSep 7, 2025
      If you hear rattling or knocking sounds from inside your Zanussi Dishwasher, the tableware might not be properly arranged in the baskets. Make sure that the spray arms can rotate freely.

Zanussi ZDLN5521 Specifications

General IconGeneral
TypeBuilt-in
Product sizeFull-size
Control panel colourBlack
Capacity13 place settings
Number of Programs7
Number of washing programs7
Drying ClassA
Energy Efficiency ClassA++
Depth550 mm
Delay StartYes
Half Load OptionYes
ProgramsEco, Intensive, Normal, Quick, Glass
Cycle time180 minutes
Depth (mm)550 mm
Number of place settings13
Drying systemCondenser

Related product manuals