What does it mean when Zanussi Dishwasher water level is too high?
If the water level inside your Zanussi Dishwasher is too high, the lights related to the programme buttons may flash 15 times intermittently. Try switching the appliance off and on. Also, make sure that the filters are clean and that the outlet hose is installed at the right height above the floor. Refer to the installation instructions for the correct height.
What to do if Zanussi Dishwasher water temperature is too high?
If the water temperature inside the Zanussi Dishwasher is too high, or if there is a malfunction of the temperature sensor, the lights related to the programme buttons may flash 6 times intermittently. Ensure that the temperature of the inlet water does not exceed 60°C. You can also try switching the appliance off and on.
What does it mean if Zanussi ZDLN5521 stops and starts during operation?
It is normal for the Zanussi Dishwasher to stop and start during operation. This provides optimal cleaning results and energy savings.
General| Type | Built-in |
|---|---|
| Product size | Full-size |
| Control panel colour | Black |
| Capacity | 13 place settings |
| Number of Programs | 7 |
| Number of washing programs | 7 |
| Drying Class | A |
| Energy Efficiency Class | A++ |
| Depth | 550 mm |
| Delay Start | Yes |
| Half Load Option | Yes |
| Programs | Eco, Intensive, Normal, Quick, Glass |
| Cycle time | 180 minutes |
| Depth (mm) | 550 mm |
| Number of place settings | 13 |
| Drying system | Condenser |
To Next Page
