Why is my Zanussi Ranges oven not heating up?
Your Zanussi Ranges oven might not be heating up because it is deactivated. To resolve this, activate the oven. Also, the clock may not be set, so set the clock. Ensure that the necessary settings are correctly configured.
What to do if my Zanussi ZCV66250BA appliance won't activate?
If your Zanussi Ranges appliance won't activate, it might not be correctly connected to the electrical supply. Check the connection. Also, the fuse may be blown. If the fuse blows repeatedly, contact a qualified electrician.
Why does the Zanussi Ranges display show "12.00"?
The Zanussi Ranges display showing "12.00" usually indicates there was a power cut. Reset the clock to resolve this.
Why is there steam and condensation in my Zanussi ZCV66250BA oven?
If you notice steam and condensation settling on the food and inside your Zanussi Ranges oven, it may be because you left the dish in the oven too long. Avoid leaving dishes in the oven for more than 15-20 minutes after cooking ends.
How to fix a Zanussi Ranges lamp that does not operate?
If the lamp in your Zanussi Ranges isn't working, the lamp is likely defective and needs to be replaced.
What to do if the residual heat indicator doesn't turn on for my Zanussi ZCV66250BA?
If the residual heat indicator on your Zanussi Ranges doesn't turn on, it could be because the zone wasn't hot enough, as it only operated for a short time. If the zone operated sufficiently long to be hot, speak to an Authorised Service Centre.
To Next Page
General
