Why is my Zanussi ZCV69360BA Ranges oven not heating up?
If your Zanussi Ranges oven isn't heating up, first, make sure the oven is activated. Then, check if the clock is properly set. Finally, ensure that all necessary settings are correctly configured.
What to do if the display of Zanussi ZCV69360BA Ranges shows 12:00?
If the display on your Zanussi Ranges shows "12.00", it indicates there was a power cut. To resolve this, simply reset the clock.
How to fix if I cannot activate Zanussi ZCV69360BA?
If you cannot activate your Zanussi Ranges, it may be due to the appliance not being correctly connected to the electrical supply. Check the connection. It's also possible that a fuse is blown. If the fuse blows repeatedly, contact a qualified electrician.
Why does steam and condensation settle in my Zanussi ZCV69360BA Ranges oven?
If steam and condensation settle on the food and in the cavity of your Zanussi Ranges oven, avoid leaving dishes in the oven for more than 15 - 20 minutes after cooking.
What to do if the water comes out of the cavity embossment of Zanussi ZCV69360BA?
If the water comes out of the cavity embossment of your Zanussi Ranges, deactivate the oven and ensure it is cold. Wipe the water with a cloth or sponge and add the correct amount of water to the cavity embossment.
Why doesn't the residual heat indicator come on in my Zanussi Ranges?
If the residual heat indicator does not come on for your Zanussi Ranges, it could be because the zone hasn't been hot long enough. If the zone operated sufficiently long to be hot, speak to an Authorised Service Centre.
Why doesn't the water boil in the Zanussi ZCV69360BA Ranges cavity embossment?
If the water in the cavity embossment of your Zanussi Ranges does not boil, set the temperature to at least 110°C. Refer to "Hints and Tips" chapter.
Safety guidelines for children and vulnerable individuals.
Guidelines for installing the appliance safely.
Safety instructions for connecting the appliance to electricity.
Specifications and dimensions of the appliance.
Guidance on where to install the appliance.
Information about the terminal board connections.
Diagram and list of main appliance parts.
Diagram of the hob zones and their power.
Diagram and labels for the control panel buttons.
Instructions for cleaning before the first operation.
Steps for preheating the oven before first use.
General| Control type | Rotary |
|---|---|
| Product type | Freestanding cooker |
| Product color | Black |
| Built-in display | Yes |
| Control position | Top front |
| Hob type | - |
| Cooking zone 1 type | Small |
| Cooking zone 2 type | Regular |
| Cooking zone 1 power | 1200 W |
| Cooking zone 2 power | 1700 W |
| Cooking zone 1 diameter | 145 mm |
| Cooking zone 1 position | Right front |
| Cooking zone 2 diameter | 180 mm |
| Cooking zone 2 position | Right rear |
| Cooking zone 3 position | Left front |
| Cooking zone 4 position | Left rear |
| Number of cooking zones | 4 zone(s) |
| Cooking zone 1 power source | Electric |
| Oven size | Medium |
| Cleaning type | Catalytic |
| Number of ovens | 2 |
| Oven net capacity | 73 L |
| Oven 2 net capacity | 39 L |
| AC input voltage | 240 V |
| Energy efficiency scale | A+++ to D |
| Connected load (electric) | 11500 W |
| Energy consumption (conventional) | - kWh |
| Energy consumption (forced convection) | 0.82 kWh |
| Oven 2 energy consumption (conventional) | 0.75 kWh |
| Package depth | 680 mm |
| Package width | 635 mm |
| Package height | 980 mm |
| Package weight | 62000 g |
| Intrastat code | 85166010 |
Weight and Dimensions| Width | 600 mm |
|---|---|
| Height | 912 mm |
| Weight | 60000 g |
| Height (min) | 894 mm |
To Next Page
