EasyManua.ls Logo

Zanussi ZCV69360WA - User Manual

Zanussi ZCV69360WA
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GETTING
STARTED?
EASY.
User Manual
ZCV69360WA
ZCV69360BA
ZCV69360XA
EN User Manual
Cooker

Questions and Answers

  • L
    lindagutierrezAug 8, 2025
    Why is my Zanussi ZCV69360WA Ranges oven not heating up?
    • J
      Jeffrey RyanAug 8, 2025
      If your Zanussi Ranges oven isn't heating up, first, make sure the oven is activated. Then, check if the clock is properly set. Finally, ensure that all necessary settings are correctly configured.
  • U
    ugrossAug 12, 2025
    What to do if the display of Zanussi Ranges shows 12:00?
    • T
      Thomas NicholsAug 12, 2025
      If the display on your Zanussi Ranges shows "12.00", it indicates there was a power cut. To resolve this, simply reset the clock.
  • A
    anthonycontrerasAug 17, 2025
    How to fix if I cannot activate Zanussi ZCV69360WA Ranges?
    • J
      Jennifer HartAug 17, 2025
      If you cannot activate your Zanussi Ranges, it may be due to the appliance not being correctly connected to the electrical supply. Check the connection. It's also possible that a fuse is blown. If the fuse blows repeatedly, contact a qualified electrician.
  • L
    lnormanAug 21, 2025
    Why does steam and condensation settle in my Zanussi ZCV69360WA oven?
    • C
      chasefryAug 21, 2025
      If steam and condensation settle on the food and in the cavity of your Zanussi Ranges oven, avoid leaving dishes in the oven for more than 15 - 20 minutes after cooking.
  • S
    Sarah NelsonAug 26, 2025
    What to do if the water comes out of the cavity embossment of Zanussi Ranges?
    • K
      kimberlymosesAug 26, 2025
      If the water comes out of the cavity embossment of your Zanussi Ranges, deactivate the oven and ensure it is cold. Wipe the water with a cloth or sponge and add the correct amount of water to the cavity embossment.
  • C
    Courtney Richardson MDAug 29, 2025
    Why doesn't the residual heat indicator come on in my Zanussi Ranges?
    • C
      Cynthia DavisAug 29, 2025
      If the residual heat indicator does not come on for your Zanussi Ranges, it could be because the zone hasn't been hot long enough. If the zone operated sufficiently long to be hot, speak to an Authorised Service Centre.
  • A
    Ann FosterSep 3, 2025
    Why doesn't the water boil in the Zanussi ZCV69360WA Ranges cavity embossment?
    • K
      Kimberly FordSep 3, 2025
      If the water in the cavity embossment of your Zanussi Ranges does not boil, set the temperature to at least 110°C. Refer to "Hints and Tips" chapter.

Zanussi ZCV69360WA Specifications

General IconGeneral
TypeFreestanding Cooker
Fuel TypeElectric
Number of Ovens1
Hob TypeCeramic
Number of Cooking Zones4
Energy RatingA
Dimensions (H x W x D)900 x 600 x 600 mm
Width60 cm
ColourWhite
Oven TypeMultifunction
GrillYes
ConvectionYes
Depth60 cm
Oven Capacity69 L
Cleaning SystemCatalytic
Height90 cm

Related product manuals