Zanussi ZDF12001SA - User Manual

Questions and Answers

E
Erica ShepherdAug 12, 2025
What to do if my Zanussi ZDF12001SA Dishwasher doesn't fill with water?
- Z
  Zachary WallsAug 12, 2025
  If your Zanussi Dishwasher doesn't fill with water, and the indicator flashes 1 time intermittently or continuously, ensure the water tap is fully open. Check that the water supply pressure isn't too low by contacting your local water authority. Also, inspect the water tap and the filter in the inlet hose for any clogs. Finally, make sure the inlet hose isn't kinked or bent.
V
Valerie AliAug 19, 2025
What to do if my Zanussi ZDF12001SA doesn't drain the water?
- P
  Paul ClarkAug 19, 2025
  If your Zanussi Dishwasher isn't draining water, and the indicator flashes 2 times intermittently or continuously, check that the sink spigot is not clogged. Also, make sure that the drain hose has no kinks or bends.
J
Julie CannonAug 27, 2025
What to do if Zanussi Dishwasher programme does not start?
- J
  Johnny BeanAug 27, 2025
  If the programme on your Zanussi Dishwasher doesn't start, make sure the appliance door is fully closed and press the Start button. Also, the appliance may have started the procedure to recharge the resin inside the water softener, which takes approximately 5 minutes.
M
Michael HerringSep 4, 2025
What to do if the anti-flood device is on in Zanussi ZDF12001SA?
- B
  Brandy MoodySep 4, 2025
  If the anti-flood device on your Zanussi Dishwasher is activated, and the indicator flashes 3 times intermittently or continuously, close the water tap and contact the Service.

Zanussi ZDF12001SA Specifications

General

Type	Freestanding
Number of Place Settings	12
Energy Efficiency Class	A+
Noise Level	49 dB
Height	85 cm
Width	60 cm
Depth	60 cm
Drying Class	A
Delay Start	Yes
Half Load Option	Yes
Programs	Eco, Intensive, Quick, Glass