What to do if my Zanussi ZDT16020FA Dishwasher programme does not start?
If your Zanussi Dishwasher program isn't starting, ensure the appliance door is fully closed. If the delay start function is activated, either cancel the setting or wait for the countdown to complete. Also, the appliance may have started the procedure to recharge the resin inside the water softener, which takes approximately 5 minutes.
Why is my Zanussi Dishwasher not filling with water?
If your Zanussi Dishwasher isn't filling with water and the display shows an error, make sure the water tap is fully open and that the water supply pressure is adequate. Check that the water tap isn't clogged and that the filter in the inlet hose is clean and free of obstructions. Also, ensure the inlet hose isn't kinked or bent.
What to do if my Zanussi Dishwasher does not drain the water?
If your Zanussi Dishwasher is not draining water and the display shows an error, check to ensure that the sink spigot is not clogged. Also, make sure that the drain hose is free from any kinks or bends.
What to do if Zanussi Dishwasher does not fill with water?
If your Zanussi Dishwasher isn't filling with water, make sure the water tap is fully open and that the water supply pressure isn't too low. Also, check the water tap and the filter in the inlet hose for any clogs. Ensure the inlet hose has no kinks or bends restricting water flow.
What to do if Zanussi ZDT16020FA Dishwasher does not drain water?
If your Zanussi Dishwasher isn't draining water, verify that the sink spigot, the filter in the outlet hose, and the interior filter system are not clogged. Also, make sure the drain hose has no kinks or bends.
Why Zanussi ZDT16020FA program does not start?
If the program on your Zanussi Dishwasher doesn't start, ensure the appliance door is fully closed. If the delay start is set, either cancel the setting or wait for the countdown to finish. Also, the appliance may be undergoing a procedure to recharge the resin inside the water softener, which lasts approximately 5 minutes.
What to do if the anti-flood device is on in Zanussi Dishwasher?
If the anti-flood device on your Zanussi Dishwasher is activated and the display shows an error, immediately close the water tap and contact an Authorised Service Centre.
How to activate Zanussi ZDT16020FA Dishwasher?
If your Zanussi Dishwasher won't activate, ensure the mains plug is correctly connected to the mains socket and check that there is no damaged fuse in the fuse box.
Why does Zanussi Dishwasher trip the circuit breaker?
If your Zanussi Dishwasher trips the circuit breaker, the amperage may be insufficient to supply all appliances in use simultaneously. Check the socket amperage and the meter capacity, or turn off another appliance. If this doesn't resolve the issue, there may be an internal electrical fault.
How to stop Zanussi ZDT16020FA making rattling noises?
If you hear rattling or knocking sounds inside your Zanussi Dishwasher, ensure the tableware is properly arranged in the baskets, referring to the basket loading leaflet. Also, check that the spray arms can rotate freely.
General| Brand | Zanussi |
|---|---|
| Model | ZDT16020FA |
| Category | Dishwasher |
| Language | English |
To Next Page
