What to do if there is no spark when trying to activate the spark generator on Zanussi ZGH66424XS?
If there is no spark when you try to activate the spark generator on your Zanussi Hob, check the following: * Confirm the hob is correctly connected to the electrical supply. * Verify the fuse isn't blown; if it repeatedly blows, contact a qualified electrician. * Ensure the burner cap and crown are correctly placed.
What to do if there is no spark when trying to activate the spark generator on my Zanussi ZGH66424XS Hob?
If there is no spark when you try to activate the spark generator, consider the following: * Check if the Zanussi Hob is correctly connected to the electrical supply. * Make sure that the fuse is the cause of the malfunction. If the fuse is blown again, contact a qualified electrician. * Place the burner cap and crown correctly.
Why does the flame extinguish immediately after ignition on my Zanussi ZGH66424XS Hob?
If the Zanussi Hob's flame extinguishes right after ignition, the thermocouple may not be getting enough heat. After you light the flame, hold the knob down for no more than 10 seconds.
What to do if the flame extinguishes immediately after ignition on my Zanussi Hob?
If the flame extinguishes immediately after ignition, it could be that the thermocouple is not heated up sufficiently. After lighting the flame, keep the knob pushed for equal or less than 10 seconds.
How to fix an uneven flame ring on a Zanussi ZGH66424XS?
An uneven flame ring on your Zanussi Hob is usually caused by a burner crown blocked with food residues. Ensure that the injector is not blocked and the burner crown is clean.
How to fix an uneven flame ring on my Zanussi Hob?
If the flame ring is uneven on your Zanussi Hob, make sure that the injector is not blocked and the burner crown is clean from food residues.
Why is there no spark when activating the spark generator on my Zanussi ZGH66424XS?
If there is no spark when you try to activate the spark generator, the hob might not be correctly connected to the electrical supply. Check if the hob is correctly connected to the electrical supply.
What to do if the flame ring is uneven on my Zanussi ZGH66424XS Hob?
If the flame ring is uneven, the burner crown might be blocked with food residues. Make sure that the injector is not blocked and the burner crown is clean.
What to do if burner cap and crown are placed incorrectly on Zanussi ZGH66424XS?
Place the burner cap and crown correctly.
General| Type | Gas Hob |
|---|---|
| Number of Burners | 4 |
| Width | 60 cm |
| Material | Stainless Steel |
| Ignition Type | Automatic |
| Flame Failure Safety Device | Yes |
| Colour | Stainless Steel |
| Gas Type | Natural Gas |
To Next Page